Manual Reer 50010 - Neo 200 (page 7 of 43) (English, German, Dutch, French, Italian, Spanish)

715743

Zoom out

Zoom in

1/43

General safety instructions

Congratulations on the purchase of your new reer baby monitor. This intuitive unit‘s highly

sensitive microphone transmits the sounds your baby makes clearly and reliably. As soon as

your child is quiet, the device switches automatically into an „ECO mode“. In this ECO mode,

the baby unit no longer emits any radiation. The baby unit‘s soothing night light helps your

child settle to sleep, and the unit then automatically switches to „ECO mode“ as soon as

your baby is quiet. The baby unit starts to send again only when noises are received. Thanks

to optional battery operation for the parent unit and robust belt clip, the baby monitor is

handy for use as a stationary or mobile unit. We are sure you will enjoy the quality of our

product for many years to come.

Please take a few minutes to read through the safety instructions carefully. You will only

be able to use the reer baby monitor with condence if all of the points mentioned here

have been checked. Please keep the instruction manual in a safe place for future reference.

! Check the unit for visible damage before each use. If you detect any damage, do not use

the unit.

! Only use the supplied chargers and mains adapters. Make sure that the operating voltage

of the power outlet matches that of the mains adapter. Check - especially when travelling

abroad - that the local mains voltage matches the voltage specied on the units and/or

mains adapters.

! Except for the battery compartment cover, never open the units or mains adapters, as

there is a risk of electric shock. If a unit does not work correctly, please do NOT try to x

the problem yourself. Please contact your dealer with any problems.

! Keep the battery out of the reach of children. In order to avoid any risk of swallowing.

! Avoid bringing the battery and/or electrical connection contacts on the units into

contact with metal objects.

! This product is not a toy! Do not allow children to play with the unit.

NOTE: This baby monitor was designed exclusively for monitoring your baby. It may

neither be regarded as a substitute for parental supervision nor as a medical device.

Safety instructions regarding installation

! Always place the baby unit out of your child´s reach (minimum distance: 1 meter).

! Never place the baby monitor inside the crib, cot or playpen.

! The power lead must be secured out of the reach of children to avoid any risk of

strangulation. Do not use extension cables.

! To ensure optimal transmission, the units must be kept upright at all times and placed in

an elevated position.

! DO NOT place the receiver in the vicinity of radio transceivers or microwaves. Radiant

emissions from these devices can signicantly aect radio reception.

! Do not use the units near water or in humid places. Do not submerge the units in water.

Do not rinse the units under running water.

! Do not cover the baby monitor with towels, clothes or blankets.

! Avoid extreme heat and direct sunlight.

Technical specication

• technology: Analogue

• transmitter: Power supply with mains

adaptor

• receiver: Power supply with mains

adaptor or optionally with 3 AAA

batteries or power pack (not included in

the scope of delivery)

• input: 100 – 220V 50Hz 0.15 A max.

• output: 6V / 300mA max.

• transmitter power: TX 50 mA , RX 130 mA

• frequency: 40 MHz

• range: 200 m

• cable length: approx. 1.80 m

• working temperature: 10°C - 40°C

• storage temperature: 0°C - 55°C

• standards: EN 300 220-1, EN 301 489-1

and EN 301 489-3

1312

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reer 50010 - Neo 200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reer 50010 - Neo 200 Manual

Product: