716155

Reer 46702 Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
- 10 - - 11 -
Put the wall hinge (c) on the connecting bar (b) before this is screwed together with the lower hinge, fig. 17.
Always mount the wall hinge from below, fig. 18 and 19.
Insert the wall bracket (e) with the flat side on the back of the wall hinge until it clicks into place, fig. 20.
Mark the position of the wall bracket on the wall, fig. 21.
Remove the wall bracket (e) from the wall hinge again. To do so press the small button on the top of the wall
bracket, push the wall bracket downwards, Abb. 22.
Put the wall bracket (e) on the position marked on the wall, draw in drill holes, fig. 23.
Secure the wall bracket (e) to the wall using the accompanying wooden screw (i), fig. 24. (use suitable screws,
4mm, and wall plugs on other mounting surfaces)
Hook the wall hinge (c) in the wall bracket (e). CAUTION: ensure that the wall hinge is correctly locked into the
wall bracket, fig. 25.
Unhook the wall hinge (c) from the wall mount (e): push the small button and lift the railing at the same time,
fig. 26.
Repeat stage 2 on the right side.
Parts used for this:
Upper hinge cap (h), wall hinge (d)
Using the accompanying Allen key (k), tighten all inserted connecting bars (b) in a clockwise direction, fig. 27.
Gently push the button on the handle backwards, simultaneously lift the gate and swing to the side, fig. 28.
Swing the door back, lift, position and push down. The door latches automatically, fig. 29.
Make sure that the door is correctly latched in place and locked!
Regularly check the safety gate for secure mounting, stability and locking function. If necessary, amend the
positions according to the instructions listed in the user manual.
Please keep the sales receipt, operating manual and article number in a safe place.
All claims based on warranty or guarantee are to be directed solely towards the retailer.
Lower
wall bracket
Wall click system
Click in
Click out
right side /
hinge side
Step 3
Completing assembly
To open door
To shut door
Note
English (EN)
English (EN)
Preparation
Step 1
Connect elements
Set angle
Warning!
other elements
Step 2
Wall mount
left side /
locking side
upper wall bracket
Determine the width, in which the gate should be installed.
Determine the positions of the individual elements:
• the individual elements can be assembled in any sequence
• any element can be secured to the wall
• the sequence can be easily changed at any time without problems
• the gate can be mounted without problem in front of and in an opening
CAUTION! The gate must assembled at least 40cm from the first step in staircases. If the distance is
too small the child can use this as a climbing aid.
CAUTION! Pay attention to keep the gate a sufficient distance away from sources of danger!
Be aware in doing so that your child may be able to reach through the gate bars!
CAUTION! Please keep the gate at least 80cm away from heat source!
Put together door element (a) + extension (l) or (n), fig. 1 to fig. 4.
The joints grip together like gears, fig. 8 and 9.
Insert connecting bar (b), upper metal cap though the connected hinges, gently screw in a clockwise direction,
fig. 5, 6 and 7.
Hinge connections of the individual elements allow 9 angle positions.
Gently lift bar section with the above lying hinge part. Choose the desired angle setting, lock the upper hinge part
into the lower, fig. 8 and 9.
Turn the connecting bar clockwise until both bar sections are securely connected to each other and can not move
any more, fig. 10.
The rails can only be tightened using the accompanying Allen key once the safety gate is completely assem-
bled!
To add additional bar elements, repeat step 1.
CAUTION: the external bar elements must be securely connected to the wall in order to ensure
that the safety gate is safe.
The locking side of the door element is labelled as left side for easier understanding. The bars can also be const-
ructed the other way round.
Attach hinge cap (g) to the upper left hinge from below, fig. 11.
Slide the wall hinge (c) on the hinge so that it surrounds the hinge above and below, fig. 12.
Attach the lower hinge cap with the screw (f) to the other hinge from below, fig. 13.
Insert connecting bar (b), upper metal cap through the connected hinges, fig. 14 to 16, tighten in a clockwise
direction, fig. 14
CAUTION: when constructing in a straight line without angle, the lower wall brackets must also
be mounted in order to guarantee stability!
When constructing with angles the upper wall brackets are sufficient.
Assembly
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 46702 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 46702 in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info