Manual Reer 46211 (page 11 of 22) (English, German, Danish, French, Italian)

716160

Zoom out

Zoom in

1/22

- 9 -

English (EN)

(B)

(A)

Install the adjustment screws (d) with the nuts on the gate compartment (a) at the top and the

bottom. Ill. 1 and 2.

Art. No. 46201: Insert nuts (e) at the top and the bottom in the slits of the crossbar before

attaching the adjustment screws. Ill. 1 and 2.

Attach the hinge bolts (c) on the gate compartment (b) at the top and the bottom. Ill. 3 and 4.

Art. No. 46201: Insert nuts (e) at the top and the bottom in the slits of the crossbar before

attaching the hinge bolts. Ill. 3 and 4.

Note: The final adjustment of the fastening screw is executed later.

Place the gate compartments (a) and (b) flush next to each other so that there is no gap between

the gate compartments, Ill. 5 and 6.

Push these apart so that the distance between the last gate slat and the wall or door surface is at

least 30 mm and maximum 62 mm. Ill. 7

Connect the 2 gate compartments (a) and (b) with the connection screws (h) and the screw

sleeves (i) at the top and the bottom. Ill. 8 and 9. Ensure that the gate compartments are

attached firmly to each other and that the vertical slats are flush. Screw the screws tight with a

Phillips screwdriver.

Mark the drill holes on the hinge side with the help of the mounting template (o). These are

marked with the name “hinge”. Ill. 17, 18 and 19. First, only the lower hinge parts (f) are attached

using the wood screws (j). Ill. 17, 20 and 21.

(In another mounting surface use suitable screws and anchors)

The screw holes for the closing side must be marked using the mounting template (o). These are

marked with the name “latch”. Ill. 12, 13 and 14.

Optionally, the stoppers (m) can be inserted either on the left or right. For this purpose, insert the

stoppers (m) on the side in the hinge supports (k) and (l), Ill. 10 and 11, before they are

attached using the wood screws (j). Ill. 15 and 16.

Hang the hinge bolts (c) into the two lower hinge parts (f) on the gate. Then install the upper hinge

parts (g). Ill. 22 and 23. Adjust the adjusting screw so that the hinge supports (k) and (l) can lock

into place well at the top and the bottom. Ill. 24 and 25.

Step 1

Step 2

Step 3

Step 4

Installing the

hinge side

Step 5

Installing the

locking side

Installing the

stopper

Step 6

Installation on stairs

Especially well suited for installation at the top of stairs as it

opens completely and does not present a tripping hazard.

Here, the direction of opening shall be limited by the

installation of the supplied stopper (m) (Step 5)

(A) Install at the top of the upper the stair

and do not install on one of the stairs.

(B) If the safety barrier is used at the bottom

of the stairs, it should be positioned in the front

of the lowest tread possible.

Installation

ATTENTION: Always open the gate away from the dangerous position to avoid dangerous

situations!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reer 46211 in the language / languages: English, German, Danish, French, Italian as an attachment in your email.

The manual is 8,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reer 46211 Manual

Product: