716172
11
Zoom out
Zoom in
Previous page
1/46
Next page
- 8 - - 9 -
English (EN)
ATTENTION: The gate must always open in the direction away from the hazard zone to avoid
dangerous situations.
Installation on stairs
Especially well suited for installation at the top of stairs as it opens completely and does not
present a tripping hazard. If installing at the top of the stairs, the stopper (o) must be installed
(Step 4).
(A) Install at the top of the upper the stair and do
not install on one of the stairs
(B) if the safety barrier is used at the bottom of the
stairs, it should be positioned in the front of the
lowest tread possible
Screw the adjustment screw with the counter-nut (c) at the top and bottom approx. 20 mm into the
gate compartment (a), fig. 1 and fig. 2 (The final adjustment of the adjustment screw is executed later).
Screw the hinge bolts (d) into the gate compartment (b) at the top and the bottom approx. 20
mm (fig. 3 and fig. 4 (The final adjustment of the hinge bolts is executed later).
Place the gate compartments (a) and (b) flush next to each other so that there is no
gap between the gate compartments, fig. 5 and fig. 6.
Push these apart so that the distance between the last gate slat and the wall or door surface is at
least 30 mm and maximum 62 mm. Fig. 8
Mount the mounting brackets (g) as depicted in fig. 9 and below in fig. 10 between two vertical
gate slats. Attention: The gate slats may never be run between the mounting bracket, fig. 7.
Screw the cover at the top (f) and at the bottom (e) to the mounting bracket (g). Tighten firmly
from the other side with the screw sleeves (k).
Optionally, the stopper (o) can be inserted either on the left or on the right. Mount the stopper (o)
with the desired side of the hinge support (m) and (n). fig. 11 and fig. 12.
Using the mounting template (q), mark the position for the hinge supports (m) and (n) the
necessary screw holes. These are marked with the name „LATCH“! fig. 14 and fig. 16 Screw the
hinge supports firmly with the wood mounting screws (l). fig. 15 and fig. 17
Use suitable screws and plugs for other mounting surfaces. 1)
1) not included in scope of delivery
Step 1
Step 2
Step 3
Step 4
Mouning of
the stopper
Step 5
Installation
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 46110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 46110 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 69,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info