716256
11
Zoom out
Zoom in
Previous page
1/53
Next page
- 11 -
Montage
Safety instructions for wall installation:
The changing table heater must be mounted on the wall in a stationary and level position. It must not be mounted
on the ceiling!
The changing table heater must not be mounted on wood, plastic or other flammable materials or under plug
sockets.
IMPORTANT! Minimum distances: The minimum distance between the heater and the changing table is 100 cm.
A minimum distance of 35 cm between the heater and the ceiling must be observed at all times. The heater must
be placed at least 65 cm away from furniture and flammable materials. Fire hazard in case of non-compliance!
For installation in bathrooms or shower rooms, the regulations of the local utility company must be observed. The
heater must be positioned in such a manner that the pull switch cannot be reached from the bath or shower.
Never install the unit above a bath tub!
1. Remove the assembly plate from the unit as shown in fig. 1.
2. Hold the wall bracket on the wall taking into account the minimum distances (fig. 5) and mark the drill holes with
a pencil. Use a spirit level to ensure the bracket is level.
3. Bolt the wall bracket to the wall (fig. 3) using the supplied screws and wall plugs.
4. Slide the changing table heater into the relevant grooves on the wall bracket (fig. 3).
5. Screw the changing table heater to the wall bracket (fig. 4) using the screws removed in fig. 1.
TIMER ON/OFF
35 cm
20 cm
100 cm
!
1 2
3 4
5
GB
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 1926 FeelWell at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 1926 FeelWell in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info