716254

Reer 19040 EasyHeat Manual

6
Zoom out
Zoom in
Previous page
1/23
Next page
1110
Putting into operation
1. Insert the mains plug into the power socket (fig. 1).
2. Pull the pull cord (fig. 2) to switch the heater on. The heater is then set to 500 W.
3. Automatic shut-off is directly activated. After 10 minutes, the device is automatically switched off or it may
be switched off at an earlier point by pulling the cord again.
Troubleshooting
10
issue possible causes remedial action
No heat radiation
• The power plug is not connected
properly.
•
The automatic switch-off function
(timer) is activated.
• Check the power plug.
• Turn the „Timer“ to „Off“ or switch
the unit off and then on again by
repeatedly pulling the pull cord.
Heat radiation despite the
indicator being switched off.
Defective LED Please contact the customer service
Cleaning, maintenance
•
Before cleaning, ensure that the unit is switched off and cooled down (pull out the power plug). Clean the
surface with a dry, slightly damp cloth. The reflector and heating tubes must be cleaned by skilled personnel only.
• This product does not require any special maintenance.
• Repairs must be carried out by skilled personnel only.
Warranty
Please retain your receipt, the user manual and part number.
Claims under warranty or under warranty commitments are to be processed by the dealer alone.
The technical specication, information and characteristics of the product described herein have been compiled to
the best of our knowledge and belief and are correct at the time of printing. Any information provided by reer should
be correct and authoritative. Nevertheless, reer does not accept liability for potential errors in this document and
reserves the right to make changes to the product design and/or specications without prior notice. Reproduction
and disclosure of information contained in this copyright-protected document, in any form or by any means - graphi-
cal, electronic or mechanical by photocopying, recording on tape or storage in a data retrieval system - even in part,
require prior written consent from reer.
Environmental protection
At the end of its life, this product must not be disposed of as normal domestic waste, but should
be recycled at a collection point for electrical appliances. Please see the relevant symbol on the
product, in the user manual and packaging. Materials can be recycled as specified. An important
contribution to the protection of the environment can be made by reusing the unit, recycling its
components or otherwise reusing old appliances. Please contact your local council to find out more
about an appropriate disposal centre.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 19040 EasyHeat at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 19040 EasyHeat in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info