716255
13
Zoom out
Zoom in
Previous page
1/54
Next page
- 13 -
230 V
1 2
1. Insert the mains plug into the power socket (fig. 1).
2. Pull the pull cord (fig. 2) to switch the heater on. The heater has two heat settings: 400 W (level „1“) and 800 W
(level „2“).
3 Pull the cord again to change the heat setting or switch the unit off (level „0“).
1. To activate the automatic switch-off function, switch the timer switch on the
bottom of the unit to the „ON“ position. The unit switches off automatically
after 10 minutes.
2. There are 2 ways of switching the unit on after automatic switch-off:
Move the rocker switch to the „Off“ position or
pull the pull cord, until the heat setting indicator shows „0“. If the pull
cord is pulled again on heat setting „1“ or „2“, the unit is switched on
again.
The unit has an automatic switch-off function if tilted. If the angle exceeds 25° (for example if the unit is mounted on the
ceiling), the power supply to the unit is cut. The unit switches back on automatically, when it is upright again.
Putting into operation
Automatic switch-off function
Switch-off if tilted
Troubleshooting
issue possible causes remedial action
No heat radi-
ation despite
heat setting
indicator
showing „1“
or „2“.
• The power plug is not connected properly.
• The automatic switch-off function (timer)
is activated.
• The automatic tilt switch-off function is
activated, because the angle of the heater
exceeds 25°.
• Check the power plug.
• Turn the „Timer“ to „Off“ or switch the unit
off and then on again by repeatedly pulling
the pull cord.
• Ensure that the heater is level and fixed to
the wall or the pedestal is upright.
10
I
O
TIMER ON/OFF
GB
English
1
0
2
ON
400 W
ON
800 W
OFF
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 19030 2in1 FeelWell at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 19030 2in1 FeelWell in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info