668581
58
Zoom out
Zoom in
Previous page
1/68
Next page
REEBOKFITNESSEQUIPMENT.COM
JET SERIES 300
TREADMILL CONSOLE GUIDE
114
把手控制項
SPEED (速度) + / -
• 運動期間增加/減少速度
• 調整時間、距離與卡路里
INCLINE (斜度) + / -
• 運動期間增加/減少斜度
• 調整時間、距離與卡路里
PULSE GRIPS (脈搏握把)
兩個把手上都有脈搏感應器,為了監測使用者的脈搏速率,必須握住把手才會顯示讀數。脈搏監測數據僅供參考,
不供醫療或追踨之用。
電腦程序
手動模式包括一般模式、時間、卡路里與距離倒數模式。
P0 手動模式
M1 - M3 時間、距離與卡路里倒數模式
P1 - P24 預設運動程序
U01 - U03 使用者定義的程序
脂肪 體脂肪功能
一般模式
1. 在待機時按下 START (開始) 立即開始手動模式
2. 運動期間可隨時使用 SPEED (速度) +/- 或 INCLINE (斜度) +/- 按鈕手動調整跑止機速度與斜度
3. 按下 STOP (停止) 按鈕可停止運動。跑步機將進入緩和運動模式
4. 取出 SAFETY KEY (安全鑰) 可讓馬達停止運轉,或按下 STOP (停止) 兩次。
TIME (時間)、距離與卡路里倒數模式
1. 待機時按下 MODE (模式) 以選取 TIME (時間)、DISTANCE (距離) 與 CALORIES (卡路里)。選取後,可使用Incline
(斜度) +/- 改變所需的設定,並按下 START (開始) 以啟動。
2. TIME (時間)、DISTANCE (距離) 或 CALORIES (卡路里) 將從選取的設定開始倒數。
3. 倒數完成時,電腦會發出嗶聲表示程序結束,速度視窗將顯示 “END” (結束),5 秒後電腦會發出嗶聲,
設定將重設為零。
P0 手動程序
P01-P24
這些是預先設定的程序,程序中的機器速度或斜度會在運動期間自動變更。
注意:如果使用者在這些程序進行期間改變速度/斜度,則會在程序的下一個階段回復成預先設定的速度/斜度。
1. 在待機畫面中,按下 PROGRAM (程序) 按鈕選取所需的程序,或使用 SPEED (速度) +/- 在程序執行期間選擇程序。
2. 按下 START (開始) 以選取並開始使用預先設定時間。
3. 這些程序的預設運動時間為 30 分鐘。選取 START (開始) 前,可按下 INCLINE (斜度) +/- 按鈕改變此設定。
4. 這些程序進行期間,速度與斜度設定可分成 10 個階段。每一階段的時間取決於所選的總時間長度。例如,10 分鐘程序 = 10
1 分鐘的階段。因此速度/斜度每 1 分鐘就會改變。時間將會改變,讓機器能夠暖機與緩和。
5. 每次速度/斜度改變時,主控台將會倒數並發出嗶聲 3 秒。
U01-U03 使用者定義的程序
1. 按下待機畫面中的 PROGRAM (程序) 按鈕,直到 U01、U02 或 U03 顯示為止。
2. 按下 MODE (模式) 以進入程序的第一個階段。
3. 按下 SPEED (速度) +/- 調整速度,按下 INCLINE (斜度) +/- 調整此階段的速度,然後按下模式繼續進行。
4. 為此程序的 10 個階段重複上述步驟。
5. 輸入好 10 個階段的資料後,按下 START (開始) 以開始執行。
6. 此 PROGRAM (程序) 現在會以所選的 USER (使用者) 號碼儲存。
在這些程序內,使用者可以定義個人運動的速度與斜度
體脂肪功能
1. 按下 PROGRAM (程序) 按鈕,直到 TIME DISPLAY (時間顯示) 中顯示體脂肪功能為止。
2. TIME (時間) 視窗將顯示預先設定的程序 (F1-F5),DISTANCE (距離) 視窗將顯示輸入資料。
3. 按下 +/- 可變更輸入參數。
4. 按下 MODE (模式) 可確認。
F-1 性別 01 男性 - 02 女性
F-2 年齡 10 - 99
F-3 身高 100 -200 公分 (40-80 英吋)
F-4 重量 20 - 150 公斤 (44-330 英磅)
5. F5 將會顯示。在此階段已儲存使用者資訊。將雙手放在脈搏感應器上約 5-10 秒。測試結果將如下所示。
19 體重過輕
(20---25) 正常體重
(26---29) 體重過重
30 肥胖
注意,所有的讀數皆僅供參考,不用於醫療設備上。
可設定速度與距離在 MPH 與 KPH 中作業
若要切換:
1. 在待機模式中,插入 SAFETY KEY (安全鑰),按下 SPEED (速度) + 與 INCLINE (斜度) + 5 秒。
2. 若為 MPH,速度將顯示「0.6」,若為 KPH 則顯示 「1.0」。
3. 重複上述程序可再次變更速度。
MPH 轉換為 KPH
58


Need help? Post your question in this forum.

Forumrules
1

Forum

reebok-jet-300-treadmill

Reset search

  • I have a jet 300+ , i want to turn off the beeping sound everytime i press a button , but when i go to settings it asks me for a password , which i didnt set . Submitted on 22-11-2022 at 10:40

    Reply Report abuse
  • My reebok subline sl8.0 ac treadmill is asking me for a password to go back to factory mode. Can anyone help me please Submitted on 20-10-2022 at 04:21

    Reply Report abuse
    • I’ve had the same issue, doesn’t seem like anyone knows , I’ve tried the usual 1234 , 0000 but nothing Answered on 20-10-2022 at 15:17

      Vote up (5) Report abuse
  • My running machine is asking me for a password input, I haven't been given any password can you help me out Submitted on 13-5-2022 at 13:20

    Reply Report abuse
  • Did any one get the answer to the below questions ?? Submitted on 20-3-2022 at 18:29

    Reply Report abuse
  • when i try to go into the more settings on my reebock jet 300+ it says input password and i dont know what to do as i never made a password Submitted on 21-1-2022 at 17:35

    Reply Report abuse
  • Can't access other settings on jet 300 +treadmill due to not having a password Submitted on 28-12-2021 at 19:41

    Reply Report abuse
  • What is the pass code in more settings and how to connect Bluetooth on jet 300+ gold Submitted on 4-11-2021 at 17:14

    Reply Report abuse
  • I have just bought a Jet 300+ treadmill. When choosing a high setting for running, the whole front shudders and shakes. I've looked at videos and none shudders and shakes like mine....is it faulty? Should I be worried?
    Submitted on 12-9-2021 at 12:34

    Reply Report abuse
  • Can't access the other settings option because I don't have a password but no password is provided. What is the password? Submitted on 28-5-2021 at 18:54

    Reply Report abuse
    • on the 300+ I found from the support team that is a factory access Answered on 10-6-2021 at 12:16

      Vote up (68) Report abuse
    • Hi I have the same problem Did you get an answer re the default password to access or how to change the password? Answered on 20-8-2021 at 12:13

      Vote up (41) Report abuse
    • Can't access other settings on 300 +due to not having a password Answered on 28-12-2021 at 19:40

      Vote up (20) Report abuse
    • Can't access other settings on 300 +due to not having a password help please
      Answered on 28-12-2021 at 19:40

      Vote up (15) Report abuse
  • After lubricant the machine why oil sign is still there. Let me know pls. Thanks Submitted on 4-5-2021 at 01:28

    Reply Report abuse
  • Hi dear, I am so sad that I can’t use my treadmill because the console signal wire was lost while moving, can anyone help me please, thank you Submitted on 31-3-2021 at 03:18

    Reply Report abuse
  • Yes hi, I am very frustrated that I lost the console signal wire while moving my treadmill and I can’t find nowhere to but another one. Thank you Submitted on 31-3-2021 at 03:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reebok JET 300 TREADMILL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reebok JET 300 TREADMILL in the language / languages: English, German, Danish, French, Italian, Portuguese, Swedish, Portuguese, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info