11
Next, repeat-
edly press the
mode button
until a “P”
appears in the
display. (Make
sure that there
is not an arrow
under the scan
symbol.)
When your
pulse is
detected, the heart-shaped indicator will flash
each time your heart beats. After a few seconds,
three dashes will appear and your pulse will be
shown. For the most accurate pulse measure-
ment, wait for about ten seconds.
If your pulse is not shown, rub your ear lobe and
reposition the pulse monitor. It may be helpful to
stop pedalling whilst you measure your pulse.
The scan
mode—
Repeatedly
press the
mode button
until an arrow
appears under the scan symbol. When the scan
mode is selected, the console will display the
pulse, speed, time, distance, fat calories, and
calories modes, for 5 seconds each, in a repeat-
ing cycle.
The speed,
time, distance,
fat calories, or
calories
mode—
Repeatedly
press the mode
button until an arrow appears below or above the
desired mode symbol. Make sure that there is not
an arrow under the scan symbol.
If desired, press the on/reset button to reset the
display.
Turn off the power
To turn off the power, simply wait for about
six minutes. If the pedals are not turned and the
buttons are not pressed for six minutes, the
power will turn off automatically.
5
Mode Button
Mode
Arrow
Mode
Arrow