559590
14
Zoom out
Zoom in
Previous page
1/79
Next page
D
gemessen hat, die dem Minimum des Trainingszielpulses entspricht, wird der Widerstand nicht mehr erhöht. Das
Programm läuft 3 Minuten lang mit konstantem Widerstand und das WARM UP ist beendet. Nun beginnt das
Zielpulshauptprogramm.
Falls Sie Ihren Trainingszielpuls innerhalb der ersten 3 Minuten nicht erreicht haben, folgen weitere 3 Minuten des
WARM UP Programms. Wenn danach der Zielpuls noch nicht erreicht ist, folgt die dritte WARM UP Phase. Falls diese den
Zielpuls immer noch nicht auf das Minimum des Trainingszielpulses bringt, warnt der Computer mit einem Piepton und
das Programm wird abgebrochen. Auf dem Zeit Display erscheint „FAILund 10 Sekunden später kehrt das Programm
zurück in den POWER ON Modus.
Ziel-Pulsprogramm (Hauptprogramm)
Nachdem der aktuelle Puls das Minimum des Trainingszielpulses erreicht hat und das WARM UP Programm damit
beendet ist, startet das Hauptprogramm und die gewählte Zeiteinstellung zählt zurück auf 0“. Während des Trainings
ermittelt der Computer alle 30 Sekunden die momentane Herzfrequenz. Hierbei werden Widerstand, Strecke und
Kalorien vom WARM UP weiterhin aufsteigend angezeigt. Mit den Pfeiltasten können Sie die gewählte Herzfrequenz
während des Trainings ändern.
Falls der Computer den momentanen Puls nicht erkennt, unterbricht er die Vergleichsfunktion und der Widerstand
bleibt konstant. Das LCD Display zeigt „P“ an und blinkt 3mal.
Falls der aktuelle Puls den maximalen Trainingszielpuls nicht erreicht, wird der Widerstand alle 30 Sekunden um ein
Level erhöht, bis der maximale Trainingszielpuls erreicht ist.
Falls der aktuelle Puls her als der maximale Trainingszielpuls ist, wird der Widerstand alle 30 Sekunden um ein Level
verringert, bis die aktuelle Herzfrequenz dem maximalen Trainingszielpuls entspricht.
Falls der aktuelle Puls länger als 3 Minuten über dem des maximalen Trainingszielpulses liegt, oder wenn die eingestellte
Zeit abgelaufen ist wird das Ziel-Pulsprogramm beendet und die COOL DOWN Funktion setzt ein.
COOL DOWN – Ziel-Pulsprogramm
Nach Beendigung des Ziel-Pulsprogramms startet automatisch das COOL DOWN Programm. Auf dem Zeit Display blinkt
für 10 Sekunden „COOL. Während die Zeit von 1:00 zurückzählt, geht der Widerstand zurück auf Stufe 1. Strecke und
Kalorien werden weiterhin aufsteigend angezeigt.
Um das Programm zu unterbrechen, drücken Sie STOP. Um zurück in den POWER ON Modus zu gelangen drücken Sie
erneut STOP. Während des COOL DOWN Programms ist es nicht möglich „START, „MODE“ und die Pfeiltasten zu
drücken.
P 10: Ziel-Zonenprogramm
Sie können im Ziel-Zonenprogramm zwischen 3 max. Zielwerten” in % wählen. Nachdem Sie Ihr Alter bestätigt haben,
ermittelt das Programm automatisch Ihre max. Herzfrequenz.
Nachdem Sie P10 ausgewählt haben, zeigt das LCD Display “65%”. Wählen Sie mit den Pfeiltasten zwischen einem max.
Zielwert von 65%, 75% oder 85% aus und drücken Sie dann ENTER um mit dem Programm fortzufahren.
Zielzonen:
65%: Gesundheit/Fettverbrennung
75%: Fitness/Body Shaping
85%: Performance
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reebok C6e-IWM monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reebok C6e-IWM monitor in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info