Manual Reebok 5000S - RBTL152040 (page 24 of 34) (English)

670023

Zoom out

Zoom in

1/34

HOW TO USE A PROGRAM DIRECTLY FROM

OUR WEB SITE

Our Web site at www.iFIT.com allows you to access

iFIT.com programs directly from the internet. To use a

program from our Web site, the treadmill must be con-

nected to your computer. See HOW TO CONNECT

YOUR COMPUTER on page 21. In addition, you must

have an internet connection and an internet service

provider. A list of specific system requirements is found

on our Web site.

Follow the steps below to use a program from our

Web site.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 11.

Select the iFIT.com mode.

To use an iFIT.com pro-

gram directly from our

Web site, press the

iFIT.com button. The in-

dicator on the button will

light.

Go to your computer and start an internet

connection.

Start your web browser, if necessary, and go to

our Web site at www.iFIT.com.

Follow the desired links on our Web site to se-

lect a program.

ead and follow the on-line instructions for using a

program.

Follow the on-line instructions to start the

program.

When you start the program, an on-screen count-

down will begin.

Return to the treadmill and stand on the foot

rails. Find the clip attached to the key and slide

the clip onto the waistband of your clothes.

When the on-screen countdown ends, the program

will begin and the walking belt will begin to move.

Hold the handrails, step onto the walking belt, and

begin walking. During the program, an electronic

“chirping” sound will alert you when the speed

and/or incline of the treadmill is about to change.

CAUTION: Always listen for the “chirp” and be

prepared for speed and/or incline changes.

If the speed or incline settings are too high or too

low, you can manually override the settings by

pressing the Speed or Incline buttons on the con-

sole. However, when the next “chirp” is heard,

the speed and/or incline will change to the

next settings of the program.

To stop the walking belt at any time, press the

Stop button on the console. The Time display will

begin to flash. To restart the program, press the

Start button or the Speed increase button. After a

moment, the walking belt will begin to move at 1

mph. When the next “chirp” is heard, the speed

and incline will change to the next settings of

the program

When the program ends, the walking belt will stop

and the Time display will begin to flash. Note: To

use another program, press the Stop button and

go to step 5.

Note: If the speed or incline of the treadmill

does not change when a “chirp” is heard,

make sure that the indicator on the iFIT.com

button is lit and that the Time display is not

flashing. In addition, make sure that the audio

cable is properly connected, that it is fully

plugged in, and that it is not wrapped around a

power cord.

Follow your progress with the matrix and the

displays.

See step 6 on page 12.

Measure your heart rate if desired.

See step 7 on page 13.

When you are finished exercising, remove the

key from the console.

See step 7 on page 15.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reebok 5000S - RBTL152040 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reebok 5000S - RBTL152040 Manual

Product: