9
Manually adjusting the c ooking time, consider time adjustment range and interv al of selected programme, given in the table
of default settings.
For y our convenienc e the cooking time range in all programmes starts with the minimum setting, enabling y ou to prolong the
operating time of the programme, if the dish is underc ooked.
In certain automatic programmes countdown starts only when the device reaches its operating temperature. E.g. If you set the
enough steam. In the “P AST A ” programme, the countdown begins after water starts boiling and the “Start” button is being re
-
pressed.
MASTERFR Y function A5
The REDMOND RMK -M911E multikitchen is equipped with a raisable heating element. It allows you to use both the bowl
Be sure to use a thermal glove for gripping the tongs. Do not touch the heating disc regardless of the position it’s in!
For safety reasons use tongs when changing the position of the heating element (included in set).
T o place the disc heating element into the low er position slightly lift it, so that its mounts exit slots on the walls of the
DO NO T try to change the position of the heating element if the applianc e is plugged in!
DO NO T close the lid if the disc heating element is set to an upper position.
For cooking in the multikitchen use only frying pan, included in set.
Time Delay Function
consideration. The time of a delay should be longer than the c ooking time of the selected programme; otherwise the programme
starts running right after you press “Start” .
When the automatic programme is selec ted and the temperature and cooking time are adjusted, you may set the “Time Delay” .
1 .
blinking.
2 . Press the “Hour” butt on repeatedly to adjust the hours in 24-hour format. Hold the button down to scroll through the
digits.
3 . Press the “Min” butt on repeatedly to adjust the minutes. Hold the button down to scroll through the digits.
4 . If you need to set a delay shor ter than 1 hour , repeatedly press the “Hour” button to reset time to zero and adjust the
minutes using the “Min” button.
5 . T o cancel the settings press the “Reheat/C ancel” button and reset.
6 .
When the time is set press and hold down the “Start” butt on. The Time Delay function indicator lights up. Set programme
starts running and the countdown begins.
7.
8 . Press the “Reheat/Cancel” button to cancel the “Keep W arm” . The button indicator goes off.
The T ime Delay function is available in all automatic programmes exc ept “FR Y ” , “PAST A ” and “ QUICK C OOK” .
It is not recommended to use the Time Delay function if dairy and other perishable products are being used ( eggs, fresh milk,
meat, cheese etc.).
Setting the “Time Delay” in the “STEAM” programme remember that the countdown starts only when the device reaches its
operating temperature (water comes to a full boil).
K eep Warm Function
“Ke ep Warm” count up is being displayed. Press and hold down the “Reheat/Cancel” button to disable the function.
Disabling The “K eep Warm” In Advance
R eheat Function
REDMOND RMK -M911E can be used for warming up cold meals. T o reheat cold meals:
•
• Close the lid until it clicks int o place and plug in the unit.
• P ress and hold down the “Reheat/C ancel” button for a few se conds until an audible signal is heared. Corresponding indi-
cators light up and the “ reheating” process begins. The timer starts its countdown.
press and hold down the “Reheat/C ancel” button. Corresponding indicators go o ff.
The function may operate for a period of 24 hours, however , we recommend using it moderately , because a prolonged thermal
Standard Operating Proc edure for Automatic Programmes
1 . Measure the ingredients according t o the recipe.
2 .
Put them into the bo wl. Mak e sure that all the ingredients including liquid are below the scale mark indicating maximum
3 . Close the lid until it clicks into place. Plug in the unit.
4 .
5 . Use the “Hour” and “Min” buttons to adjust the time set by default for each programme.
6 .
7. Press and hold down the “Star t” button. The “Star t” and “R eheat/Cancel” button indicators light up. Set programme starts
running and the countdown begins. Countdown of the “STEAM” programme be gins only when water comes to a full boil,
repressed.
8 .
9 .
10. T o interrupt cooking proc ess at any stage, to cancel the set programme or the K eep W arm function press and hold down
the “Reheat/C ancel” button.
T o achieve better cooking results, we rec ommend to refer to the cookbook pro vided. Each out of recipes has been adjusted for
this particular model.
If you did not achieve the desired result using automatic programmes, try versatile programme called “MUL TICOOK” , featuring
a wide time and temperature adjustment range. This programme gives endless opportunities for new culinary experiments.
“MUL TIC OOK” Programme
This programme can be used to cook any meal with your personal time and temperature settings. REDMOND RMK-M911E,
featuring the “MUL TICOOK” programme will be able to replace a big number of kit chen appliances. Now any recipe, either
from your family c ookbook or Internet, can be adjusted for your multikitchen.
right after the programme starts running. The “Reheat/Cancel” button indicator lights up.
•
•
•
A big number of various dishes c an be prepared with the help of “MUL TICOOK” . Follow the recommendations of our chefs given
in the recipe book and the table of recommended temperature settings.