659483

Redmond RMG-1205-8-E Manual

6
Zoom out
Zoom in
Previous page
1/112
Next page
6
I V.
BEFORE CONTACTING SERVICE
CENTER
Problem Possible cause Solution
Appliance will not switch on,
power indicator is not on
Appliance is not
plugged in
Connect the appliance to an electric
socket
Motor drive stopped during
operation
Overload protec-
tion system has
gone off
Switch off the appliance pressing ON/
OFF button and unplug it. Scrape out
the feed chute, press the overload pro-
tection reset button on the bottom of
the device. Then again plug in the ap-
pliance and press ON/OFF button. In
case the device still fails to operate,
contact the service center.
One may feel foreign smell
while the appliance is in
operation
Appliance over-
heats during op-
eration
Shorten operation time, increase breaks
to cool down the appliance
There is protective
covering on some
parts of the appli-
ance
This is normal, smell will disappear in
due time.
V. PRODUCT WARRANTY
We warrant this product to be free from defects for a period of 2 years from
the date of purchase. If the appliance fails to operate properly within the
warranty period and is found to be defective in material or workmanship,
we will repair or replace it free of charge. This warranty comes into force
only in case an original warranty service coupon with a serial article number
and an accurate impress of the company of the seller proves the purchase
date. This limited warranty does not cover damage caused by the failure to
use this product for its normal purpose or in accordance with the instructions
on the proper use and maintenance of the product, or any kind of repair
works. Do not try to disassemble the appliance and keep all package contents.
This warranty does not cover normal wear of the appliance and its parts
(lters, bulbs, non-stick coating, gaskets, etc.).
Service life and the applicable product warranty period start on the date of
purchase or the date of manufacture (if the purchase date cannot be estab-
lished).
You can determine manufacture date by serial number, located on the iden-
tication label on the housing of the appliance. The serial number consists
of 13 digits. 6th and 7th digits of the serial number identify the month, 8th
digit the year of manufacture.
Service life of the product, established by the manufacturer is 3 years from
the date of purchase, provided that the unit is used and maintained in ac-
cordance with the user manual and applicable technical standards.
The packaging, user manual and the appliance itself shall be taken to the
applicable collection point for the recycling of electrical and electronic equip-
ment. Do not throw away the electronic waste with household trash to help
protect the environment.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Redmond RMG-1205-8-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RMG-1205-8-E in the language / languages: All languages as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info