659424
6
Zoom out
Zoom in
Previous page
1/200
Next page
6
Carefully read all instructions before operating and save them for future reference.
By carefully following these instructions you can considerably prolong the service
life of your appliance.
IMPORTANT SAFEGUARDS
The manufacturer is not responsible for any
failures arising from the use of this product
in a manner inconsistent with the technical
or safety standards.
This appliance is intended to be used in house-
hold and similar applications such as: staff
kitchen areas in shops, ofces and other work-
ing environments; farm houses; by clients in
hotels, motels and other residential type envi-
ronments; bed and breakfast type environments.
Before installing the appliance, check that the
device voltage corresponds with the supply
voltage in your home (refer to rating plate or
technical data).
While using the extension cord, make sure that
its voltage is the same as specied on the
device. Using different voltage may result in a
re or other accident, causing appliance dam-
age or short circuit.
The appliance must be grounded. Connect only
to a properly installed wall socket. Failure to
do so may result in the risk of electrical shock.
Use only grounded extension cords.
СAUTION! During use the appliance becomes
hot! Care should be taken to avoid touching the
housing, bowl, or any other metal parts while
operating. Make sure your hands are protected
before handling the device. To avoid possible
burns, do not lean above the open appliance.
Always unplug the device after use, before clean
-
ing or moving. Never handle plug with wet hands.
Do not pull power cord to disconnect from out-
let; instead, grasp plug and pull to disconnect.
Keep the power cord away from hot surfaces
(gas or electric ovens) or sharp edges. Do not
let cord hang over edge of table or counter.
Remember: damaging the cord may lead to
a failure that will not be covered by the war-
ranty. If the cable is damaged or requires
replacing, contact an authorized service cen-
ter only to avoid all risks.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Redmond RMC-M90E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RMC-M90E in the language / languages: All languages as an attachment in your email.

The manual is 8,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info