Manual Redmond RMC-M4502E (page 8 of 192) (All languages)

659429

Zoom out

Zoom in

1/192

This is a non-volatile memory unit. In case of a short term power cut-off all settings, including Preset function,

will be saved.

“Preset” Function

Time delay function allows programmeming the cooking programme to be over by certain time. The programme

can be delayed for a period of time from 10 minutes to 24 hours with 10 minute intervals. The appliance is

equipped with two independent timers, allowing to record the time by which the dish is typically cooked. To

set the Timer:

1. Press “Menu” to select the automatic cooking programme.

2. Press “Preset” to select the Preset 1 or Preset 2 memory cells.

Press “Hour/Min” to enable the hour adjustment mode on the timer, the hour indicator will start ashing.

4. Set the desired hour value by pressing “Cooking Time”. The interval is 1 hour.

5. Press “Hour/Min” to enable the minute adjustment mode. Minute indicator starts blinking.

6. Set the desired minute value by pressing “Cooking Time”. The interval is 10 minutes.

Press “Start” at the end of the time adjustment. The “Start”, “Cancel/Reheat” and “Preset” button indicators

will light up. The dish readiness time will be displayed.

Setting the Preset function remember that the countdown in some programs begins only when the

device reaches its operating temperature.

“Keep Warm” Function

This function automatically activates in the standby mode together with the start of the selected cooking

programme and when the programme is complete, keeps the ready food warm at 70-75°С for 24 hours. When

Keep Warm is enabled the “Cancel/Reheat” indicator lights up, the programme countdown is displayed at the

end of the cooking programme. Press “Cancel/Reheat” button to disable the function. Button indicator goes

off.

When cooking dishes in the “MULTI-COOK” programme at the temperature not higher than 80°С the

Keep Warm function will be disabled.

Preliminary Disabling the “Keep Warm” Function

You can disable the Keep Warm function right after the start of any programme. To do so after selecting the

cooking programme (after pressing the “Start” button) press and hold down the “t°C / Keep Warm ON/OFF”

button for 3 seconds. The “Cancel/Reheat” button indicator will go out. Repressing and holding down the “t°C /

Keep Warm ON/OFF” button for 3 seconds will re-enable Keep Warm. The “Cancel/Reheat” button indicator

will light up. This function is also available when using the Time Delay function.

Reheat Function

The multicooker REDMOND RMC-M4502Е can be used for reheating cold meals. Just put the ready dish into

the bowl, install it into the multicooker, close the lid, press the “Cancel/Reheat” button until an audible signal

is heard. After a while the appliance will reheat the dish to 70-75°С and keep it warm for 24 hours. Repress

“Cancel/Reheat” to disable Reheat.

Keep all warning labels, including the serial number identication label located on the housing.

Wipe the housing of the appliance with a soft, damp cloth. Rinse the inner bowl with warm soapy water and

dry thoroughly. An odour on rst use of the appliance is normal and does not indicate a malfunction. In such

case, clean the appliance, following “Cleaning and Maintenance”.

After transportation or storage at low temperatures allow the appliance to stay at room temperature

for at least 2 hours before using it.

I I. OPERATION

Before Use

Place the device on a at, stable, and hard surface away from any objects or cabinets that could be damaged

by steam, humidity, or high temperatures.

Before operating, make sure that the outer and inner parts of the multicooker have no dents, cracks or any

other visible damages. There should not be any obstructions between the heating element and the bowl.

Clock Adjustment

Plug in the unit. Press and hold down the “Preset” button for 3 seconds, the minute indicator of the current

time will start ashing.

2. Press “Cooking Time” button repeatedly to set the minutes (setting interval is 1 minute). If the button is

pressed for more than 3 seconds, the accelerated time adjustment will start. Press “Hour/Min” at the end

of the minute adjustment, the hour indicator will start ashing.

3. Set the hour value by pressing “Cooking Time”. The interval is 1 hour. If the button is pressed for more than

3 seconds, the accelerated time adjustment will start.

4. When you nish entering the data press “Cancel/Reheat” button or do nothing for a few seconds to save

your settings. Time indicator stops blinking.

Cooking Time Adjustment

Multicooker REDMOND RMC-M4502E allows manually adjusting the cooking time, set by default for each

programme. Setting interval and time adjustment range depend on the programme chosen.

Press “Hour/Min” button, minute indicator starts blinking. Press “Cooking time” button repeatedly to adjust

the minutes. If the button is pressed for more than 3 seconds, the accelerated time adjustment will start.

2. Press “Hour/Min” button, hour indicator starts blinking. Press “Cooking time” button repeatedly to adjust

the hours. If the button is pressed for more than 3 seconds, the accelerated time adjustment will start.

If it’s necessary to set the cooking time to less than one hour, successively press the “Cooking Time” button

in the hour adjustment mode until the hour indicator goes out. Press “Hour/Min”, the minute indicator

will start ashing. Set the desired minute value by successive pressing the “Cooking Time” button.

4. To cancel previous settings press the “Cancel/Reheat” button (after that you will need to re-enter the

cooking programme).

If the automatic programme is manually adjusted the appliance immediately sets the minimum cooking

time!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RMC-M4502E in the language / languages: All languages as an attachment in your email.

The manual is 4,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Redmond RMC-M4502E Manual

Product: