Manual Redmond RK-M170S-E SkyKettle (page 9 of 200) (All languages)

659399

Zoom out

Zoom in

1/200

RK-M170S-E

GBR

Remove all wrapping materials and stickers except for the



After the appliance transportation or storage at low

temperature keep it at room temperature for at least two hours

before plugging in.

Wipe the base of the appliance with a damp cloth, then let it

dry. You may notice foreign smell when using the appliance for

the rst time. This does not mean its malfunction.

You are advised to boil water in the kettle a few times before



I I. OPERATION

(scheme

, p. 5)

Before use

Place the kettle and base on a hard, even, dry at surface away

from other objects or surfaces which may be damaged by steam.

NOTE: the appliance is to be used only for heating and boiling

water.

After connecting the kettle to the mains power supply the indicators

on the base will light up for 1 second. A short signal is emitted and

the appliance switches to standby mode (no indicator light).

Water-temperature maintenance mode

This mode switches on automatically after heating and allows

a set water temperature to be maintained (40, 55, 70, 85 or

95°С) for 12 hours. If the water falls below the set temperature,

the heating element switches on automatically. The water is

not reboiled. At the end of the process, the appliance emits 5

short signals and switches to standby.

Boiling water

1. In the standby mode, press 100°C. The indicator lights up.

2. If you want to keep the water at a set temperature after

boiling, press the relevant temperature button (40, 55, 70,

85 or 95°С). The indicator lights up.

The temperature can be set or changed in the same way during

or after boiling.

3. Press and wait about 3 seconds: the indicator lights

up and the water starts to heat up.

4. When the water has boiled, depending on the settings:

•

the kettle switches back into the standby mode (no indicator

light);

•

the kettle switches into the temperature-maintenance mode

(the and temperature indicators light up).

5. Press to interrupt the heating process or switch off the

automatic temperature-maintenance mode.

Heating water without boiling

This is the recommended mode for bottled artisan or ltered water.

Water which has not been boiled retains its natural properties,

which is particularly important when brewing premium teas.

1. In the standby mode, press . The indicator lights up.

2. Within 5 seconds, press the temperature button to set the

water temperature (40, 55, 70, 85 or 95°С). The indicator

lights up.

If the temperature is not set within 5 seconds, the appliance

switches to the standby mode (no indicator light). The

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RK-M170S-E SkyKettle in the language / languages: All languages as an attachment in your email.

The manual is 5,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Redmond RK-M170S-E SkyKettle Manual

Product: