659398

Redmond RK-M142-E Manual

7
Zoom out
Zoom in
Previous page
1/176
Next page
7
RK-M142-E
GBR

the user’s right to aftersale service .
Wipe the base of the appliance with a damp cloth, then let dry. You may notice

After the appliance transportation or storage at low temperature keep it at
room temperature for at least two hours before plugging in.
You are advised to boil water in the kettle a few times before use to get foreign
smell out and disinfect the appliance.
II. OPERATION

1.
Fix the kettle with the base to the solid even dry horizontal surface. Make
sure the outgoing vapour during boiling does not fall on wallpaper,
decorative coats, electric units and other items, which can be damaged
by humidity and high temperature.
2. Unwind the power cord to the desired length. Put the excessive part into
the recess at the bottom of the stand. Use the extender of appropriate
capacity if necessary (no less than 2.5 kW).
3. Lift the kettle off the base. Press the opening button on the appliance
lever.
4. Pour water into the kettle. Water level should be between minimum and
maximum levels on the inner surface of the appliance frame. If the kettle

in case of water shortage.
ATTENTION! The unit is meant only for water heating and boiling.
5. 

6. Plug in the kettle.

1. Press the «0/I» button. A short audible signal will be heard, and the process
of water heating will start. Button illumination will light up solid during
the operation.
2. The appliance will be automatically turned off after boiling.
3. To interrupt the heating process lift the «0/I» button.
The settings are saved if the kettle is lifted off the base during operation. The appli-
ance operation will be restarted automatically after returning the kettle to the base.

• The kettle is supplied with an automatic shut-off system upon boiling.
• In case of water shortage the automatic overheat protection will turn off
the kettle. Wait till the appliance is cooled, thereafter it will be ready for
operation.
III. CLEANING AND MAINTENANCE
Unplug the kettle and allow it to cool before cleaning.
DO NOT USE solvents (petrol, acetone, etc.), abrasive cleansers, and abrasive
coated sponges while cleaning.
ATTENTION! Before repeated usage make sure that the electrical contacts are kept dry!

Clean the kettle body and base with a soft cloth. Dry the kettle before operation.
ATTENTION! Never immerse the kettle, the base, the power cord or the socket
in water: the electrical contacts should not contact with water.
Descaling
During operation, depending on the composition of usable water, oxide spots
and scale can appear on the heating element and inner walls of the appliance.
To remove it use special nonabrasive cleansers for scale cleaning and removal
from kitchen appliances.
1. Pour water into the kettle ¾ from maximum capacity and bring to a boil.
2. After the kettle turns off, add eight percent acetic acid solution to the
maximum level on the inner surface of the body.
3. Leave this solution inside the kettle for several hours.
4. Empty the kettle and rinse properly.
5. Fill the kettle with clean water up to the maximum level on the inner
surface of the body and bring it to boil.
6.
Empty the kettle and rinse it again. If scale still remains, repeat the
procedure mentioned above.
You can also use special means for descaling. Follow manufacturer’s instructions
in this case.

1. 
2. 
3. 
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Redmond RK-M142-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RK-M142-E in the language / languages: All languages as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info