659488

Redmond RI-C222-E Manual

6
Zoom out
Zoom in
Previous page
1/144
Next page
6
Symbol of the
temperature
mode
Temperature
control dial
position
Fabric Ironing recommendations
•
SYNTHETICS Viscose
High heat may cause discoloration,
shrinkage, or melting of fabric
• •
SILK/WOOL
Silk
Do not use spray on silk to avoid
water marks
Wool
Use spray or damp press cloth to iron
wool. High heat may cause shrinkage
• • •
COTTON/LINEN Cotton, linen Steam ironing is recommended
III. CLEANING AND MAINTENANCE
Self-clean feature
To remove scale and other debris from the steam holes on the soleplate carry out the self-
cleaning procedure at least twice a month. The harder the water the more frequently the
iron should be self-cleaned.
1. Fill the water tank with water until the “Max” ll line.
2. Disable the steam feature (turn the steam output control dial into position). Turn
the temperature control dial into “Max” position. Plug in the iron.
3.
After the heating indicator goes out unplug the iron and position it horizontally above
the sink.
4. Press and hold down the “Calc Clean” button, swinging the iron lightly back and forth.
Steam and hot water releasing from the soleplate will remove scale and other debris.
5. By the end of the self-cleaning procedure open and empty the water tank. Close the cap.
6. Wait for the soleplate to cool down thoroughly and wipe with damp cloth.
7. Repeat the procedure if necessary.
NOTE! Use tap water to carry out the self-cleaning procedure. Do not ll the water tank with
distilled (demineralized), softened, or boiled water for best results.
To clean soleplate
Before cleaning the soleplate ensure that the iron is unplugged and cooled down thor-
oughly. Cool soleplate can be wiped with damp cloth or sponge. Do not use abrasive
cleaners, aggressive chemicals, and abrasive or metal sponges.
Iron storage
The appliance must be stored in a dry location away from direct sunlight or heating appli-
ances. Store the iron in vertical position to avoid damage to the soleplate. To keep the
soleplate in good condition do not allow it to come into contact with metal and other hard
or sharp objects.
Always store the iron empty to prevent the lime scale build-up that may stain fabric during
ironing.
IV. BEFORE CONTACTING SERVICE CENTRE
Problem Possible cause Solution
Soleplate remains
cold, heating indica
-
tor does not light up
The power cord is not connected to
an electrical outlet
Connect to an electrical outlet
Electrical outlet is not working
properly
Connect to properly functioning
electrical outlet
Auto shut-off feature activated
(auto shut-off indicator on the
handle is ashing)
Refer to section “Auto shut-off
feature”
Soleplate barely
warms up
Selected temperature is too low
Turn the temperature control dial
to select required temperature
Iron produces no
steam
Steam feature is disabled
Turn the steam output control dial
to select required steam output
Iron produces very
little steam
Not enough water in the water tank
Fill the water tank at least ¼ full
The steam output control dial is set
to medium setting
Turn the steam output control dial
to increase steam output
Anti-drip feature activated
Wait for the soleplate to reach the
selected temperature (heating
indicator goes out)
Steam coming from
the holes in soleplate
stains fabric
You used water with chemical ad-
ditives
Do not use water with chemical
additives
You used distilled or softened water
Use common tap water or half tap
water and half distilled water
You did not empty the water tank
after last use
Carry out the self-cleaning procedure.
Always empty the water tank after use
Soleplate is dirty and
stains the fabric
Selected temperature is too high
Refer to “Fabric Ironing Chart” and
garment labels to select the correct
temperature
Fabric has not been rinsed suf-
ciently or you have ironed new
garment before washing it
Clean the soleplate. Thoroughly
rinse the garment to remove any
traces of detergent residue that
may damage the soleplate
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Redmond RI-C222-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Redmond RI-C222-E in the language / languages: All languages as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info