597828
36
Zoom out
Zoom in
Previous page
1/183
Next page
COPYRIGHT © 2015 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON
955-0116_V6.1, REV-E | 36
REMOVE THE MEDIA BAY
To troubleshoot issues with the media bay or SSD, you may need to remove and re-install the media bay. Unless
you are troubleshooting media-related issues, DO NOT remove the media bay.
WARNING: Before installing or removing the media bay, you MUST turn off the BRAIN.
REQUIRED TOOL: T10 TORX driver
1. Turn off the BRAIN.
2. Loosen the four (4) captive screws in a cross pattern (“X” pattern) using a T10 TORX driver.
3. Remove the media bay from the BRAIN.
4. Inspect the connections and pins on the BRAIN and ensure that they are clean and undamaged.
NOTE: DO NOT touch any part of the exposed boards or connectors.
5. Re-attach the media bay as soon as possible to prevent dust or debris from entering the BRAIN. For more
information, go to “Install the Media Bay” on page 36.
INSTALL THE MEDIA BAY
WARNING: Before installing or removing the media bay, you MUST turn off the BRAIN.
REQUIRED TOOL: T10 TORX driver
1. Turn off the BRAIN.
1. Place the media bay on the BRAIN, so that the mounting holes of the media bay align with the screw holes
of the BRAIN.
2. Use a T10 TORX driver to tighten the four (4) captive screws by about two (2) turns in a cross pattern (“X”
pattern). DO NOT FULLY TIGHTEN.
3. Tighten the four (4) captive screws evenly. DO NOT exceed 70 in-oz, or damage may occur.
WARNING: DO NOT OVERTIGHTEN.
INSTALL THE FOCUS HOOK
For more information on the focus hook storage location and mounting point, go to “BRAIN Connectors, Focus
Hook, and Back Focus” on page 16.
REQUIRED TOOL: Slotted screwdriver
1. Remove the focus hook from the focus hook storage location on the media bay using a slotted screwdriver.
2. Tighten the focus hook into the focus hook mounting point on the media bay using a slotted screwdriver.
WARNING: DO NOT OVERTIGHTEN.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red WEAPON - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red WEAPON - 2015 in the language / languages: English as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info