597827

Red Scarlet X 4.0 - 2013 Manual

227
Zoom out
Zoom in
Previous page
1/250
Next page
RED SCARLET-X OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0003_v4.0, Rev-A | 227
2.
Power down both cameras, then power back up. If properly connected, LAN will illuminate Green on the
UI.
3.
Connect a SYNC cable P/N 790-0154 to each camera and connect as to your 3
rd
party device.
A.
Yellow BNC connector is for SMPTE unbalanced Timecode input.
B.
Green BNC connector is for Tri-Level Sync (Genlock) input.
C.
White BNC connector is a dual-purpose (Shutter SYNC input or GPI) input.
4.
Go to SETTINGS > SETUP > GPIO/SYNC > SYNC MODE and select GENLOCK.
5.
Verify the camera’s project frame rate matches the Genlock and Timecode generator(s) framerate(s).
6.
Verify the camera’s HD-SDI monitor rate matches the project rate.
7.
Verify the camera’s sensor frame rate is an integer multiple of the project rate.
8.
When properly connected and synchronized, TC, GEN and SYNC will illuminate Green on the UI.
OPERATION
CHANGING SETTINGS
When changes are made to the Master camera settings, the Slave camera setting will also change, but not in
real-time. For example, when you change the Frame Rate on the Master camera, you will not see the change
on the Slave camera until you set the Master camera at the new Frame Rate.
Also when making changes to the Secondary menu settings, the Slave camera will not display those changes
unless it affects items displayed on the main screen (example: when HDRx is enabled on the Master camera,
HDR will change to HDRx on the Slave camera).
… 227 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red Scarlet X 4.0 - 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red Scarlet X 4.0 - 2013 in the language / languages: English as an attachment in your email.

The manual is 18,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info