597827
212
Zoom out
Zoom in
Previous page
1/250
Next page
RED SCARLET-X OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0003_v4.0, Rev-A | 212
CONFIGURE REDMOTE CONNECTION WITH COMPUTER
(MACINTOSH)
The next step in upgrading REDMOTE firmware is to establish communication between the computer and the
REDMOTE.
1.
Connect a USB to mini-USB cable between the MAC and the USB connector on the REDMOTE.
NOTE: When properly connected to the PC, the battery charge indicator will flash.
2.
Go to System Preferences and choose Network.
NOTE: This may open automatically when the REDMOTE is connected.
3.
Look for a device called RNDIS/ ...Gadget.
4.
Change Configure IPv4 setting to Manually.
5.
In the IP Address field, enter 192.168.0.1.
6.
In the Subnet Mask field, enter 255.255.255.0.
7.
Click Apply.
8.
The Status should change to Connected after changes.
NOTE: After entering the IP address as shown above you may not connect during the upgrade procedure. If
you go back and check the IP address you see that it is 0.0.0.0 and the status of the device is shown as
Connected, you may need to enter the IP address again.
9.
Go back to REDMOTE Upgrade Utility and click on Connect to establish communication with the
REDMOTE.
10.
Connection is Established With REDMOTE will be displayed when connected. If the connection is not
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red Scarlet X 4.0 - 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red Scarlet X 4.0 - 2013 in the language / languages: English as an attachment in your email.

The manual is 18,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info