597827

Red Scarlet X 4.0 - 2013 Manual

136
Zoom out
Zoom in
Previous page
1/250
Next page
RED SCARLET-X OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0003_v4.0, Rev-A | 136
COMMUNICATION
Communication Menu allows you to set a unique identification for the camera (or a group of cameras) when
operating in command and control communications network. Parameters are NAME, GROUP, TARGET, set a
SERIAL PROTOCOL, ENABLE DHCP, C2C or EXT, IP ADDRESS, NETMASK and GATEWAY. Using the serial
port or a direct Ethernet interconnect, two cameras, or one camera and one external device can be
connected. If the camera is connected via Ethernet to a hub or router, multiple cameras and devices can
communicate to each other.
NAME
Allows the user to create a unique camera NAME used in network communications
NOTE: The camera name field is limited to 8 characters.
GROUP
A camera can also be identified as a member of a GROUP of devices. (For example, a group "3DRIG_A"
could include two cameras "CAM_A_L" and "CAM_A_R"). The default group is named "DEFAULT". Group
names (like camera Names) can be used to uniquely address commands to a specific group of networked
cameras. Note: the group name is limited to 8 characters, default name is DEFAULT.
TARGET
Using TARGET the user can specify if this camera can send commands to ALL devices on the network, to
NONE of the devices on the network (meaning the camera will only listen to messages and not originate
messages) or to a specific TARGET device - which can either be the NAME of a specific camera or device or
a name of a GROUP of cameras or devices.
This structure allows for a lot of flexibility. For example on a multi-rig 3D shoot the user can either send
commands to an individual camera (e.g. Set CAM_A_L to 1/48th exposure), to a group of cameras (e.g. Set
"3DRIG_A" to 48 FPS), or to all cameras (e.g. Start Recording on all cameras). It is important to note that
with the exception of the NONE setting, all command filtering is happening on the receiver side of the
… 136 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red Scarlet X 4.0 - 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red Scarlet X 4.0 - 2013 in the language / languages: English as an attachment in your email.

The manual is 18,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info