597825

Red Scarlet X 3.2 - 2012 Manual

158
Zoom out
Zoom in
Previous page
1/242
Next page
COPYRIGHT © 2012 RED Digital Cinema 955-0003_v3.2, Rev-A1
156
APPENDIX B: MANAGING DIGITAL MEDIA
MEDIA
REDMAG 1.8” SSD is available with capacities of 64GB, 128GB or 256GB. Record duration is
dependent on resolution, quality and frame rate, but a 64GB SSD will typically provide 24 minutes of
24fps 5K RAW recording.
On MAC computers with REDCINE-X PRO installed, RED Watchdog will mount the SSD as “READ-
ONLY” by default and you cannot write the firmware to the SSD. RED Watchdog is identified by the RED
Coin icon located on the Right side of the Menu Bar. Right-click on the icon to enter RED Watchdog
settings and change to mount the drive as “READ-WRITE” to allow you to save the firmware to the SSD.
Refer to REDCINE-X PRO OPERATION GUIDE for complete RED Watchdog instructions and details.
IMPORTANT: After connecting REDMAG 1.8” SSD to the camera and BEFORE recording, you
should format the media using the camera (even if formatting was previously performed on a
computer). Go to ADANCED MENU > MEDIA > FORMAT to properly format media before
recording.
FORMATTING MEDIA
Media must be formatted prior to using it for recording. Formatting is performed on camera, although
media may be erased on a Macintosh OS X personal computer, allowing the camera to just add the
necessary project profile and clip log data.
NOTE: Media formatted on-camera will use a name and root volume in the format:
Camera Letter + Reel Number + Month + Day + ** where ** is a two digit alphanumeric random number
generated by the camera for each file e.g. A001_0512A6.RDM
Clips recorded to the media follow similar naming conventions
A001_C001_0512A6_001.RDC and A001_C001_0512A6_H.mov etc.
IMPORTANT: Media must always be un-mounted prior to removal or disconnection from the
camera. This ensures power is removed from the digital media and any open data files are closed.
Failure to do so may result in lost data or corrupted files. Refer to REMOVE MEDIA FROM
CAMERA (UNMOUNT).
This procedure outlines the formatting of REDMAG 1.8” SSD media using the RED DSMC camera.
Formatting the SSD media will take about 10 seconds.
1. Insert SSD into camera.
- Insert the REDMAG 1.8” SSD with the RED logo facing outward (away from camera body). SSD
firmly into its slot, but without using excessive force to prevent damage.
2. When SSD media is inserted into the camera, the camera will recognize if the media is unformatted:
- On LCD, EVF and external monitors, in the media section of the GUI, NONE will be displayed
twice (as opposed to when no media is inserted, the GUI displays NONE with three dashes
below “---“).
… 158 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red Scarlet X 3.2 - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red Scarlet X 3.2 - 2012 in the language / languages: English as an attachment in your email.

The manual is 10,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info