597825

Red Scarlet X 3.2 - 2012 Manual

130
Zoom out
Zoom in
Previous page
1/242
Next page
COPYRIGHT © 2012 RED Digital Cinema 955-0003_v3.2, Rev-A1
128
NETWORK
If the Gigabit Ethernet port is used, additional settings are required. Each camera or device requires a
unique IP ADDRESS. For simple camera-to-camera communication via Ethernet, both cameras need to
be in the same sub-net.
Use the same sub-NETMASK and GATEWAY addresses and the first three groups of the IP address
need to be the same.
In the example below, two cameras two cameras are assigned to the group “3D RIG.” Note the IP
Addresses.
Master
Slave
DHCP
If a DHCP-server is available in the
communications network the DHCP option can
be checked and the camera will obtain an IP
Address, Subnet Mask and Gateway address
automatically from the DHCP -server.
C2C
If the camera-to-camera (C2C) check box is
checked, changes to the settings on this
camera will be sent out via the network as UDP
packets as a SET command (Which then sets
the property on other cameras). SET commands
sent to this camera will not be propagated.
EXT
If the EXT check box is checked this camera
can be controlled via TCP/IP from an external
device.
IP Address
Permits the user to adjust the camera’s static IP
address.
Netmask
Permits the user to adjust the Subnet Mask
address.
Gateway
Permits the user to adjust the Gateway address.
… 130 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red Scarlet X 3.2 - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red Scarlet X 3.2 - 2012 in the language / languages: English as an attachment in your email.

The manual is 10,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info