597822
137
Zoom out
Zoom in
Previous page
1/165
Next page
Build 31 v31.6.16 Beta
© 2007-2011 RED.COM INC. JUNE 22, 2011
136 136
In record, the Program output provides two independent outputs of 1280 x 720p 10-bit 4:2:2 progressive
scan video, at 59.94 or 50.00 Hz.
In playback, if PLAYBACK is set to 720p, the Program output provides two independent outputs of 1280 x
720p 10-bit 4:2:2 progressive scan video, at 59.94 or 50.00 Hz.
If PLAYBACK is set to 1080p, the Program output provides a 1920 x 1080p 10-bit 4:4:4 RGB progressive
scan video signals at 23.98, 24.00, 25.00, or 29.97 Hz.
NOTE: The Program HD-SDI output provides 4 channels of embedded audio plus timecode.
NOTE: When in Varispeed, the Program output will be blanked.
NOTE: RED ONE outputs progressive scan video, it does not support 1080PsF format.
NOTE: If an ANAMORPHIC record mode has been selected (2K ANA, 3K ANA, 4K ANA) the video
visible on the Program HD-SDI output has been stretched 2:1 to illustrate the final 2.40:1 aspect ra-
tio of the final image projection. The actual recorded image is 1.2:1 aspect.
PREVIEW HD-SDI
A single DIN 1.0/2.3 connector labeled PVW provides a high definition video preview output.
Pin: Signal Description Direction
Center
HD-SDI SMPTE-292M HD-SDI Out
Shield/Screen
GROUND Camera ground --
Preview HD-SDI Output
NOTE: If PREVIEW type is set to MENUS (DVI) the PVW output is disabled.
In record, the Preview output provides a 1280 x 720p 10-bit 4:2:2 progressive scan video, at 59.94 or
50.00 Hz.
In playback, if PLAYBACK is set to 720p, the Preview output provides a 1280 x 720p 10-bit 4:2:2 pro-
gressive scan video, at 59.94 or 50.00 Hz.
If PLAYBACK is set to 1080p, the Preview output provides a 1920 x 1080p 10-bit 4:2:2 progressive scan
video signals at 23.98, 24.00, 25.00, or 29.97 Hz.
NOTE: the Preview HD-SDI output provides 4 channels of embedded audio plus timecode.
NOTE: The embedded timecode value is equal to the Timecode value of the recorded frame pre-
viewed by the PVW output. I.e. the timecode sequence will be discontinuous.
NOTE: RED ONE outputs progressive scan video, it does not support 1080PsF format.
NOTE: If an ANAMORPHIC record mode has been selected (2K ANA, 3K ANA, 4K ANA) the video
visible on the Preview HD-SDI output has been stretched 2:1 to illustrate the final 2.40:1 aspect ra-
tio of the final image projection. The actual recorded image is 1.2:1 aspect.
HDMI
An HDMI Type A connector provides an HDTV compatible 720p video and audio signal, or a DVI / SXGA
compatible 1280 x 848 progressive scan video signal, at 50.00 or 59.94 Hz.
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red One 31.6.16 - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info