597822

Red One 31.6.16 - 2011 Manual

49
Zoom out
Zoom in
Previous page
1/165
Next page
Build 31 v31.6.16 Beta
© 2007-2011 RED.COM INC. JUNE 22, 2011
48 48
REDCODE 42 REDFLASH 8GB REDFLASH 16GB RED-DRIVE
RED-RAM
REDMAG
2K 2:1 ---- 90 fps 100 fps
100 fps
2K 16:9 ---- 75 fps
90 fps
90 fps
2K ANA ---- 90 fps 100 fps 100 fps
3K 2:1 ---- 42 fps 48 fps 48 fps
3K 16:9 ---- 36 fps
42 fps
42 fps
3K ANA ---- 42 fps
48 fps
48 fps
4K 2:1 ---- 25 fps 25 fps 25 fps
4K HD ---- 25 fps 25 fps 25 fps
4K ANA ---- 25 fps 25 fps 25 fps
4.5K WS ---- 25 fps 25 fps 25 fps
TIME
When Ramp is enabled, this value specifies the transition time to be used by the camera between the
(start) Frame Rate and the End (frame) Rate. To adjust: Select TIME and twist joystick to change the hig-
hlighted DURATION box to the desired setting. Range is 1-120 seconds. Default value is 5 sec.
END RATE
When Ramp is enabled, this value specifies the final (ending) speed of the ramp in frames per second.
When a ramp transition has been completed, the camera will continue to record at the End Rate until the
end of the Recording. Range is 1- 25 fps. Default value is 25 fps.
NOTE: When in Varispeed modes the camera maintains the last exposure time selected (unless the
requested frame rate requires a shorter exposure time) to provide a constant exposure. If a variable
exposure is required set the Shutter Mode to Relative - this is a fixed angle setting.
TIME-LAPSE
The Time-lapse menu supports single frame image capture and step frame recording under the control of
an internal Intervalometer, side RECORD key or an external (GPI) trigger.
NOTE: Prior to recording in Timelapse with extended exposure times (1/ 3 rd sec or longer) it is
recommended that a fresh Black Shading routine is performed. Ensure the camera is set up in
Timelapse at the desired exposure time, then press SYSTEM > SETUP > MAINTENANCE > BLACK
SHADING to perform a Black Shading calibration. After recording Timelapse at extended exposure
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red One 31.6.16 - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info