597822
11
Zoom out
Zoom in
Previous page
1/165
Next page
Build 31 v31.6.16 Beta
© 2007-2011 RED.COM INC. JUNE 22, 2011
10 10
This setting supports a guaranteed minimum of 18dB of input signal headroom above reference, plus the
maximum available Signal to Noise Ratio for the resulting 24-bit digital recording.
VIDEO MONITORING OUTPUTS
In its default configuration, the RED ONE camera can simultaneously support a RED EVF, RED LCD, 3
HD-SDI outputs and one HDMI output, with two of these outputs supporting full GUI overlay graphics.
Default setting for GUI support is RED EVF and RED LCD. However, if either one of these is not present,
full GUI overlay support is automatically enabled on HD-SDI and HDMI outputs.
RED EVF: 1280 x 848 resolution RGB 4:4:4 progressive video display with Surround View, frame guides
and safe action / title overlays, zebra and false color exposure overlays, waveforms, camera status and
operation menus.
BOMB (Pro) EVF: 1280 x 848 resolution RGB 4:4:4 progressive video display with Surround View, frame
guides and safe action / title overlays, zebra and false color exposure overlays, waveforms, camera status
and operation menus. Can display either the upper 784 lines or lower 784 lines of the 1280 x 848 pixel
viewfinder output.
RED LCD: 1024 x 600 resolution RGB 4:4:4 progressive video display with Surround View, frame guides
and safe action / title overlays, zebra and false color exposure overlays, waveforms, camera status and
operation menus.
HD-SDI (2): Also referred to as Program HD-SDI. When in record mode, these connectors provide two
extra copies of the HD-SDI PREVIEW signal. When in playback mode, these connectors provide a dual-
link 10-bit RGB 4:4:4 video signals conforming to SMPTE 372M.
PREVIEW HD-SDI: 1280 x 720 resolution 10-bit 4:2:2 video output (720p 50.00 /59.94 Hz).
PREVIEW HDMI: 1280 x 720 resolution 10-bit 4:2:2 video output (720p 50.00 /59.94 Hz).
NOTE: If a RED EVF or RED LCD is connected, the PREVIEW HD-SDI and HDMI outputs will provide
Surround View, frame guides, safe action / title, and timecode / clip name. If both a RED EVF and
RED LCD are connected, PREVIEW HD-SDI and HDMI outputs only support Surround View.
NOTE: Only if a RED EVF or RED LCD is connected, the HDMI output can also support a 1280 x 848
resolution video output with Surround View, frame guides, safe action / title, timecode / clip name,
waveform, and camera status and operation menu overlays. This signal should be compatible with
the majority of DVI based SXGA+ computer monitors.
To select between these modes perform the following:
1. Push the SYSTEM menu button.
2. Using joystick, select MONITOR. Push the joystick in or down to select.
3. Using the joystick, select PREVIEW.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red One 31.6.16 - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red One 31.6.16 - 2011 in the language / languages: English as an attachment in your email.

The manual is 12,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info