597816
238
Zoom out
Zoom in
Previous page
1/253
Next page
955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
237 237
BACK FOCUS ADJUSTMENT
WARNING: THERE IS A SCREW-IN METAL PLUG INSTALLED IN THE CAMERA BODY COVERING
THE BACK FOCUS SCREW. THIS PLUG MUST BE REMOVED
BEFORE PERFORMING A BACK
FOCUS ADJUSTMENT. TO REMOVE THE PLUG, USE A T-10 TORX SCREWDRIVER.
NOTE: To perform this procedure as written, you must have a PL mount and RED Focus™.
Back focus is adjusted by turning the back focus adjustment on the top of the camera’s front plate using
a T-10 Torx screwdriver. This screw is indicated by a Siemens Star with an arrow pointing to its location.
Back Focus Adjustment Location
1. Remove the screw-in plug located in the back focus adjustment opening using a T-10 Torx
screwdriver.
2. Place the camera on a level, stable surface or mount the camera on a tripod.
3. Install RED Focus to the camera PL mount.
a. Remove the camera lens or sensor cover if equipped.
b. Install RED Focus onto the camera in the position shown.
c. Ensure RED Focus is secured to the camera with the camera lock ring.
RED Focus Properly Installed on Camera
238


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red Epic - 3.3 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red Epic - 3.3 2012 in the language / languages: English as an attachment in your email.

The manual is 13,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info