Manual Red Epic - 3.3 2012 (page 14 of 253) (English)

597816

Zoom out

Zoom in

1/253

13 13

• Exporting to EXR file format will give you a multi-view EXR with both exposures (like a stereo EXR).

NOTE: If you ignore the X-track data, you will have a standard exposure with up to 13.5 stops of

dynamic range just as if you had not enabled HDRx. For this reason, we encourage the A-track

exposure to be "normal" as it provides the most options. If you are tempted to shoot "over-under",

you are then fully committed to using HDRx and your post-production options are reduced.

NOTE: When recording in HDRx mode the camera records twice as many frames per second so the

maximum frame rate or minimum REDCODE ratio, and the maximum record time on your media

will be cut in half.

MAGIC MOTION™

Shooting at 24fps and with an 180 degree (1/48th) shutter on a film or digital camera may create an

optical illusion we are familiar with, however it is not really the way the eye sees motion. To understand

this, ask someone to stand in front of you and swing their arm over their head from one side to the other.

What you would observe in the recording is a constant motion blur until the arm stopped. What your eye

sees though is both motion blur AND a sharper reference to the arm and hand all along the motion path.

"Magic Motion" provides such a combination of motion blur (A-track) and a sharper reference (X-track),

with the bonus of extreme dynamic range not available with any other motion capture camera system.

AUDIO RECORDING

The RED DSMC camera can record up to two discreet channels of microphone level uncompressed 24-

bit, 48 KHz audio (four channels of microphone level or line level audio inputs when equipped with a PRO

I/O Module), that are synchronized with video and timecode to a REDMAG 1.8” SSD digital media

Magazine.

Input signals are routed via a high quality pre-amplifier and soft clip analog limiter in order to achieve the

desired audio reference / recording level and maximize dynamic range.

To assist with audio reference level setup, the camera provides a color-coded Audio Level Meter in the

Graphical User Interface. Meter range is –36dBu to +20dBu (-56dBFS to 0dBFS) with audio input type,

reference level and audio input clipping indicators.

Audio monitor output options include a 2-channel headphone output on the camera Brain and 2-channel

line level analog outputs from the optional PRO I/O Module, plus 2-channel and 4-channel 24-bit 48KHz

uncompressed digital audio embedded in the HD-SDI and HDMI outputs.

MICROPHONE LEVEL ANALOG INPUTS

The recording level of a Microphone input is affected by the sensitivity of the microphone and the Gain

setting of the camera’s pre-amplifier. Available pre-amplifier range is +15dB to +57dB, with a default value

of +17dB. The camera operator should choose a Gain value that aligns the input signal to the 0dBu

reference line drawn on the camera’s Audio Level Meter (or the 0VU reference line if operating at that

level).

This setting provides up to 30dB of input signal headroom above reference 0dBu level before clipping (up

to 26dB above 0VU reference level) and maximizes the signal to noise ratio of the 24-bit digital recording.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Red Epic - 3.3 2012 in the language / languages: English as an attachment in your email.

The manual is 13,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Red Epic - 3.3 2012 Manual

Product: