597815
210
Zoom out
Zoom in
Previous page
1/240
Next page
955-0002_v3.2, Rev-A1 COPYRIGHT © 2012 RED Digital Cinema
209
Green BNC connector is for Tri-Level Sync (Genlock) input.
White BNC connector is a dual-purpose (Shutter SYNC input or GPI) input.
4. Go to SETTINGS > SETUP > GPIO/SYNC > SYNC MODE and select GENLOCK.
5. Verify the camera’s project frame rate matches the Genlock and Timecode generator(s) framerate(s).
6. When properly connected and synchronized, TC, GEN and SYNC will illuminate Green on the UI.
OPERATION
CHANGING SETTINGS
When changes are made to the Master camera settings, the Slave camera setting will also change, but
not in real-time. For example, when you change the Frame Rate on the Master camera, you will not see
the change on the Slave camera until you set the Master camera at the new Frame Rate.
Also when making changes to the Secondary menu settings, the Slave camera will not display those
changes unless it affects items displayed on the main screen (example: when HDRx is enabled on the
Master camera, HDR will change to HDRx on the Slave camera).
RECORDING
When the power/record button is pressed on the Master camera to start/stop recording, the Slave
camera will also start/stop recording.
POWER DOWN
When the Master camera is powered down using the Secondary Menu > Power, the Slave camera will
also power down.
210


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Red Epic - 3.2 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Red Epic - 3.2 2012 in the language / languages: English as an attachment in your email.

The manual is 11,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info