769239

Recaro Salia Manual

20
Zoom out
Zoom in
Previous page
1/192
Next page
20
7. Setting Up The Resting Position
• To adjust the sitting position, loosen the locking mechanism by pulling the sitting position adjustment lever
(15) on the front of the seat shell (Fig.28). You can now push the seat shell into the desired position.
• Once the desired position is achieved, release the sitting position adjustment lever (15) and let it lock in
(Fig.29). Check secure locking by pushing or pulling the seat shell.
8. Removing The Child Car Seat
• To remove the RECARO Salia, lift the ISOFIX length adjustment lever (14) on the front of the child car
seat up, and pull the child car seat forward a little bit. Now, push the light-grey buttons on the ISOFIX
unlocking lever (18) down, and unlock the ISOFIX connectors by pulling these levers on both sides as
illustrated (Fig.30). You can now remove the RECARO Salia from the vehicle.
• The support leg can now be folded in.
9. Removing Of Cover And Cleaning The Child Car Seat
• The seat and seat belt may be cleaned with lukewarm water and soap. The belt lock can be rinsed out
with water if necessary.
• RECARO seat covers are machine-washable in accordance with the treatment label sowed into the
cover. Please remove all removeable foam pads from and out of the covers before washing. These
pads should not be washed. Higher temperatures may cause the colours to fade. Never spin or dry the
covers in a dryer, as the fabric may come apart from the padding.
• Remove the Velcro fastener as illustrated to remove the shoulder padding from the fastening belts (Fig.31).
• As a next step, open the press studs on the pads and remove the shoulder belts (Fig.32).
• Now, open the press studs on the back of the headrest (Fig.33).
• You can now remove the head rest cover with a forward motion (Fig.34).
• The back padding is attached to the headrest with press studs. After opening the press studs, you can
pull off the padding downwards (Fig.35).
• To remove the bottom cover part, open the Velcro fasteners in the back area (Fig.36).
• Pull the belt lock from the groin strap padding as shown in the illustration (Fig.37).
• Loosen the cover by opening the Velcro fasteners on the outside of the seat shell (Fig.38). You can
now remove the cover from the seat shell.
• The cover in the shoulder area can be removed once the press studs on the outside have been opened
and the cover has been detached from the hooks (Fig.39).
• Thereafter, open the press studs in the back area (Fig.40).
• You can now remove the shoulder cover as shown (Fig.41).
• Before cleaning the cover of the seat insert (12), please remove the inserted foam parts (Fig.42, 43).
• After washing, please let the cover dry completely before you re-install it in the reverse order.
10. Installing The Sun Canopy (not present in all variants)
• On both sides, guide the locking pin of the sun canopy into the shoulder support of the RECARO Salia
at the marked locations (Abb. 44).
• Now, plug the cover into the circumferential cover groove (Fig.45).
• The sun canopy can be opened or closed by pulling at its front end (Fig. 46).
• There is, furthermore, and additional foldable element at the front end of the sun canopy.
11. General instructions
The instructions for use are in the compartment on the back of the child car seat. After use, they should
always be placed back there.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Recaro Salia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Recaro Salia in the language / languages: All languages as an attachment in your email.

The manual is 8,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info