461166
25
Zoom out
Zoom in
Previous page
1/46
Next page
25
ENGLISH
[ PAGING RELAY contacts (3 pin removable connector).
The internal relays switches when a priority command is present.
1. normally open
2. common
3. normally closed
Max. voltage on contacts: 24 V; max. current: 0.5 A
] Amplifier output (AM 2160: max. 160 W; AM 2320: max. 320 W) to loudspeakers
(100 / 70 V constant voltage line – 4 Ω impedance).
Use 1 output only (read the section ‘Loudspeaker connection’).
A Mains connector with fuse
Before connecting the power supply cable, verify that the apparatus voltage (230 or 115 V ac)
corresponds to the available mains supply.
Note: the fuse type is marked on the rear panel (below the mains connector).
OPERATION
i
VOX’ is an internal circuit that automatically activates the channel 1 priority when a signal is
detected on the audio INPUT 1.
POWER ON (OR WHEN A PRIORITY COMMAND ENDS)
If no priority command is present (including VOX and CHIME SEQUENTIAL COMMAND), all the
channels 1, 2, 3, 4 and the selected AUX INPUT are mixed together.
i
The music volume (coming from a CD / MP3 player, a tuner, etc.) depends on the aux input
volume control on the front panel (see 2) and also the relevant GAIN control setting (see 15 and
17) on the rear panel.
i
The aux inputs can be activated / muted through the front panel buttons (see 3 and 4).
PRIORITY
If a priority command is present (or VOX), the selected AUX INPUT can be either included in the
mixed signal sent to the amplifier or excluded, according to dip-switch no.1 setting (see 20: the 8
dip-switch group).
During a priority command (‘PRIOR’ LED turns on), only the audio signal of the channel with priority
(and an AUX INPUT, if turned on) is sent to the amplifier (and the PRE OUT output).
i
The selected aux input is always excluded from the signal sent to the amplifier when the
CHIME SEQUENTIAL COMMAND is activated.
The priority mode and the VOX function are set through the dip-switches no.2 and no.3 of the 8 dip-
switch group (see 20):
1 2 3
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RCF AM2320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RCF AM2320 in the language / languages: English, French, Italian as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info