681604
33
Zoom out
Zoom in
Previous page
1/33
Next page
Model: RLDED5099-UHD
E P 4 0 0 8 5 5 4
CONTENTS
1
1
2
3
3
6
7
3
4
8
9
7
8
8
9
9
4
5
5
11
12
12
SAFETY
PRECAUTION
IMPORTANT
SAFETY
INSTRUCTION
ACCESSORIES
GETTING
STARTED
5
CONTROL
REFERENCE
GUIDE
WALL MOUNT
INSTALLATION
INITIAL SETUP
TV SETUP
CONNECTIONS
Remote Control
Front View
Back View
Antenna Connection
AV Connection
Y Pb Pr Connection
HDMI Connection
VGA Connection
Headphone Connection
Power Cord Connection
Coax(SPDIF) Connection
Putting The Unit On A Proper Place
Turning The Unit On For The First Time
Source selection
Picture Menu
Audio Menu
Time Menu
Setup Menu
LOCK(Parental) Menu
TV(CHANNEL) Menu
Zoom Function
1
English
10
7
9
14
16
18
19
22
25
26
12
CONTENTS
27
10
29
11
12
30
DISPLAY
MODE
SPECIFICATION
TROUBLE-
SHOOTING
GUIDE
PC Formats
Video Formats
TV Symptom
SAFETY CLASS : This is an IEC safety class ǁ product.
28
SAFETY PRECAUTION
1
2
ACCESSORIES
Please check and identify the supplied accessories.
..........................................................................
.......................................................................
...................................................................
GETTING STARTED
USING THE REMOTE CONTROL
BATTERY REPLACEMENT
CAUTION
: Danger of explosion if battery is incorrectly replaced.
NOTES
WARNING :
3
x 2
x 1
x 1
x 1
Remote control .......................................................................
Remote control
Battery(AAA)
Warranty Card
Instruction Manual
·Point the remote control at the remote sensor located on the unit.
·When there is a strong ambient light source, the performance of the infrared remote sensor
·may be degraded, causing unreliable operation.
·The recommended effective distance for remote operation is about 16 feet (5 meters).
When the batteries become weak, the operating distance of the remote control is greatly
reduced and you will need to replace the batteries.
·If the remote control is not going to be used for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
·Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
·Always remove batteries as soon as they become weak.
·Weak batteries can leak and severely damage the remote control.
Do not dispose batteries in a fire. Batteries may explode or leak.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Base stand and 2 screws
..........................................................
x 1
CONTROL REFERENCE GUIDE
4
REMOTE CONTROL
1.STANDBY
To switch on the TV or make the TV into
standby mode.
2.MUTE
Press this button to mute or restore sound.
12.INFO
Show the information of the program you are watching.
9.SOURCE
Press this button to select an input source.
5.PMODE
Press this button to select a picture mode for different
picture qualities.
6.SMODE
Press this button to select sound setting for different
sound effects.
3.0-9
Allows you to change the channel of the TV.
4.
Switches back and forth between the current and
previous channels.
8.SLEEP
To select the amount of time before your TV turns
Off automatically.
10.VOL+/VOL-
Increases/Decreases the Volume control.
11.CH+/CH-
Skips to the next/previous channel on TV mode.
17.UP/DOWN/LEFT/RIGHT
Moves the cursor upward/downward/to the left/to the right
when making a selection.
18.MENU
Displays the OSD Menu of the TV.
21.
No function.
7.MTS
To change among STEREO, MONO and SAP. If there is no
second language available for the signal received, LCD
Display audio will output to mono.
20.ENTER
Press to confirm selections on a menu screen.
19.Exit
Press this button to exit the on screen display.
13.EPG
Press this button to select the electronic programme
guide in DTV mode.
23. FAV
Press this button to show the favourite list.
24. FAV+/FAV-
Press this button to go through the FAV channel list.
14. CH.LIST
Display program list.
15. AUTO
Press to do auto configuration directly(PC MODE).
16. ASPECT
Select the aspect ratio settings:Wide/Zoom/Cinema/
Normal( ).In PC Mode:Wide/dot to dot
22.CC
Press the button to enter into the CC mode.
-
22
23
24
21
PMODE SMODE
MTS SLEEP
SOURCE
INFO
VOL CH
EPG
CH.LIST
AUTO
ASPECT
MENU
EXIT
ENTER
CC FAV FAV+ FAV-
"Remarks: The Universal Remote code is 808F. "
is service port)
(The USB jack function
(The USB jack function is service port)
VGA
PC AUDIO
EARPHONE
COAX
Y
PRPB
CVBS
RL
CONTROL REFERENCE GUIDE
BACK VIEW
FRONT VIEW
1.Color Screen
2.Standby Indicator
Indicates whether the unit is ON
or in STANDBY (OFF) mode.
Light in red: The unit is in STANDBY.
Light in blue:The unit is turned ON.
3.Remote Sensor
Do not block this sensor or the
remote control will not work.
4. Speakers
5
1.POWER CORD
10.HDMI IN JACK
3.COAX OUT JACK
7.VGA IN JACK
5.CVBS IN
6.PC AUDIO IN JACK
4.YPBPR IN
8.TV ANTENNA TERMINAL
9.USB IN JACK
2.HEADPHONE JACK
RF
HDMI2
HDMI1 HDMI3
9
10
USB
CONTROL REFERENCE GUIDE
6
VOL-
VOL+
CH-
CH+
MENU
SOURCE
STANDBY
1. VOL- Button
2. VOL+ Button
3. CH- Button
4. CH+ Button
Press to select the input source of the TV.
5. MENU Button
6. SOURCE Button
7. STANDBY Button
1 2 3 4 5 6 7
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must
be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
For receiving over-the-air TV broadcasts, we
recommend that you use an external fixed antenna.
Should you require the use of a temporary antenna,
please ensure that you purchase an antenna with
sufficient ability to receive in weak signal areas.
Only when you are in close proximity to a transmitter
will a temporary antenna reproduce a signal as
strongly as a fixed antenna.
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
CONNECTING AN A/V DEVICE
NOTE
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE)
VIDEO OUTPUT
Connecting to a VCR / Video Game System / Camcorder
AUDIO
VIDEO OUT
NOTE
To connect A/V devices such as a VCR, video game system or camcorder.
Connect the AUDIO / VIDEO cable (not included) as shown.
Make sure you connect the cable from the other equipment ( and ) to this unit
Please refer to the user manual
for the other equipment for
more information.
Satellite, cable or TV antenna
cable to TV ANTENNA
terminal (cable not included)
7
(AV in)
To AUDIO / VIDEO
IN jacks
To AUDIO / VIDEO
OUT jacks
CVBS
RL
COMPONENT
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING
CONNECTION
High-Definition (HD) Devices with component video output must be connected to the Y input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment
PbPr
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection
for use with DVD players, DTV, set-topboxes and other digital AV devices. HDMI was developed to provide
the technologies of High Bandwidth Digital Content Protection (HDCP) as well asDigital Visual Interface
(DVI) in one specification. HDCP is used to protect digital content transmitted and received by
DVI-compliant or HDMIcompliant displays.
HDMI has the capability to support standard, enhanced or high-definition video plus standard to
multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of
up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and
connectors), and communication between the AV source and AV devices such as DTVs.
To HDMI
IN jack
To HDMI
jackOUT
Connect the HDMI cable (not included) as
shown:
Make sure you connect the cable from the
source equipment ( ) to this unit
( ).
HDMI OUT
HDMI IN
HDMI CABLE
(NOT INCLUDED)
COMPONENT OUT and AUDIO OUTto the unit COMPONENT IN.
8
NOTE
When connecting a DVD player to the television,
the picture resolution is solely dependent upon
the resolution supported by the DVD player attached.
DVD player resolutions vary from 480i to 1080p.
and this television can support DVD players up to
a maximum resolution of 1080p.
* May require a subscription
for receiving HD channels,
check with your cable/satellite
service provider for details.
To COMPONENT
VIDEO OUT jacks
To COMPONENT
VIDEO IN jacks
To COMPONENT AUDIO
OUT jacks
COMPONENT IN
AUDIO IN jacks
To COMPONENT
Y
PRPB
CVBS
RL
CONNECTIONS
CONNECTING A
AUDIO - PC OUT
VGA AUDIO - PC IN
PC
VGA
Connect the 15-pin D-SUB PC/VGA connector
from your computer to the 15-pin D-SUB PC/VGA
input on this unit using a monitor cable and an
audio cable (not included) as shown.
Make sure you connect the cable from the computer
( and ) to this unit
( ).
TO PC Connector
TO AUDIO OUT jacks
NOTE
Insert the power plug fully into the socket outlet
If the power plug is loose it could generate heat and
cause fire
Do not touch the power plug with a wet hand
This may cause electrical shock
Do not use any power cord other than that provided
with this TV This may cause fire or electrical shock
Do not damage the power cord
A damaged cord may cause fire or electrical shock
• Do not move the TV with the cord plugged in the
socket outlet.
• Do not place a heavy object on the cord or place
the cord near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not pull on the cord. Hold onto the power plug body when disconnectingcord.
• Do not use a damaged power plug or socket outlet.
.
( ,
.)
.
( .)
. ( .)
.
( ).
connected to prevent electrical shock.
Ensure that the power plug is easily accessible.
Ensure the earth pin on the power plug is securely
9
An apparatus with CLASS ǁ construction
and
CONNECTIONS
Connection to a Home Theater Audio System
For BEST audio performance
Connecting to a Home Theater System
Dolby Digital can deliver optimal 2 channel
stereo or surround sound with five discrete
full range channels plus a sixth channel for
a subwoofer.
Enjoy optimal sound reproduction from your
system with a Dolby Digital amplifier that
incorporates a digital coaxial input. Connect
an optional digital cable directly to the
television’s Coax audio output to listen
through all inputs except VGA.
The VGA does not support digital audio
How To Setup Digital Output
Press the MENU button on the remote control
Press the right ► arrow button to select AUDIO
Press the down arrow button to highlight
SPDIF type right ► Raw or PCM
Coax
SPDIF OUT
10
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Standard
Move Select Return
MENU
50
50
0
Off
Picture Audio
Audio Language
English
SPDIF Type
RAW
Lock
Channel
WALL MOUNT INSTALLATION
INSTALLING / REMOVING THE BASE STAND
WARNING :The LED Display is very fragile,and must be protected at all times when removing the base
Stand.
Be sure that no hard or sharp object or anything that could scratch or damage the LED display comes into
contact with it. Do NOT exert pressure on the front of the unit at any time because the screen could crack.
1 Disconnect all cables or cords connected to the unit.
2 Lay the unit down on a flat surface with the back side facing up. Please make sure to place a soft
cushioned material such as a pillow or thick piece of foam beneath the screen.
3 To remove the base stand, loosen screws off the holes then pull downwards to release
the base stand.
4 To install the base stand, put the stand into the hole at the bottom of the TV then insert screws to the
holes and tighten.
.
.
.
.
MOUNTING ON THE WALL
NOTE
Remove the base stand before mounting the unit on the wall.
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 15.7"x 15.7”
(400mm x 400mm) mounting kit designed for flat-panel TVs(not supplied). Mount this unit according to
the instructions included in the mounting kit.
Length of screw should not exceed 34 mm.
11
15.7
Four mounting holes
(size M6 screw)
15.7
INITIAL SETUP
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface.
To avoid danger, do not expose the TV
to water, or a heat source
(e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.
PUTTING THE UNIT ON A PROPER PLACE
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV
antenna or cable,
turn the television ON.
A screen will display asking you to run a
to search and receive
available local digital channels.
It is here where you will select antenna options
and run .
Channels will be stored in the TV tuner.
Press the button on the remote control.
Press the button to highlight AIR/CABLE.
Channel Auto Scan
Channel Auto Scan
MENU
Using the ◄ ► buttons, scroll to highlight mode.TV
SOURCE SELECTION
1.Press the SOURCE button on the remote control.
2.
the ENTER button.
Note:
1. Before watching please make sure all necessary
cables and devices are connected.
Use orbutton to select the optionsthe
(The screen will change to your desired source
(TV,Component HDMI1,HDMI2,HDMI3 ,VGA)
/AV,
and select any of them using the ► buttonor).
12
2. When connecting the component or AV of DVD
devices, First select Component/AV, then the upper
right corner of the screen will display corresponding
Component or AV.
Please run
Channel Auto Scan
INPUT SOURCE
TV
HDMI1
VGA
HDMI2
HDMI3
AV
Component
INITIAL SETUP
AIR.
Setup
12
6
Tim
e
Picture Audio
Cable System
Auto
MENU
Start to Scan
Setup
MENU
Picture Audio
12
e
miT
RF CH
Found
7
4
Air Mode: Select when connected to an
indoor/outdoor antenna.
AIR
Setup
Lock
12
6
Tim
e
Picture Audio
Channel
Air /Cable
Auto Scan
Favorite
Show Hide
Channel No
Channel label
DTV Signal
Air
Move
MENU
Select Return
MENU
Setup
12
6
Tim
e
Picture Audio
Air /Cable
Auto Scan
FavoriteFavorite
Show HideShow Hide
Channel NoChannel No
Channel labelChannel label
DTV SignalDTV Signal
Cable
MENUMENU
Cable Mode: Select if you subscribe to
a pay television service including satellite.
CABLE
How to Navigate
Setup
12
6
Tim
e
Picture Audio
Cable System
AUTO
MENU
Start to Scan
Setup
MENU
Picture Audio
12
6
e
miT
RF CH
Found
7
4
Press thebutton to highlight
Using the ◄► button to highlight CABLE.
Press thebutton to select AUTO SCAN then
press the button to start Channel Auto Scan.
Press the button to select AUTO SCAN.
Press the ENTER button and the cursor will move
up and CABLE SYSTEM will be displayed next.
Press ► the button to select STD > IRC > HRC >
Auto (Auto is recommended).
Press the button to select Auto Scan
and press ENTER to start Channel Auto Scan.
Channel Auto Scan may take several minutes
to complete.
Channel Auto Scan may take several minutes
to complete.
NOTE: For cable or satellite users with no TV antenna, there no need to run Channel Auto Scan.
Connect your cable or satellite set top box to one of the available inputs on the TV for viewing.
13
KOCE-LB
Return
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Move
Select Return
Move
Select Return
Move
Select Return
Return
TV SETUP
Setup
12
6
Tim
e
Picture Audio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Standard
Normal
MENU
50
50
50
0
50
Picture
PICTURE MENU
Setup
12
6
Tim
e
Picture Audio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Standard
Normal
Move
MENU
50
50
50
0
50
Setup
12
6
Tim
e
Picture Audio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Standard
Normal
MENU
50
50
50
0
50
The PICTURE menu offers options to enhance and refine the picture displayed on your TV
based on ambient room light and personal preferences.
Adjustment options include contrast, brightness, color, tint, sharpness and color mode.
How to Navigate:
Press the MENU button on the remote control. Navigate using the ◄► buttons to select PICTURE.
Press the button to highlight ,
then press the ► button to select your viewing
preference from 5 factory options:
STANDARD > DYNAMIC > MILD >POWER SAVING USER>
The STANDARD setting is recommended for most
viewing environments.
Depending on the ambient light level in the room,
you may find one of the other options
more pleasing.
To make more critical picture adjustments based on your own preferences in USER:
Use the button to highlight Contrast.
Navigate using the ◄► buttons to
increase or decrease contrast intensity.
Use the button to highlight Brightness.
Navigate using the◄► buttons to
increase or decrease overall brightness.
14
Select Return
Move Adjust
Return
Move Adjust
Return
Lock
Channel
Lock
Channel
Lock
Channel
MEMC
Off
MEMC
Off
MEMC
Off
Use the button to highlight MEMC
Navigate using the buttons to selsct◄►
Low,Normal,Strong.
Play 120Hz movies,MEME need to open
TV SETUP
Picture
PICTURE MENU
Setup
12
6
Tim
e
Picture Audio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Standard
Normal
MENU
50
50
50
0
50
Setup
12
6
Tim
e
Picture Audio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Standard
Normal
MENU
50
50
50
0
50
Setup
12
6
Tim
e
Picture Audio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Standard
Normal
MENU
50
50
50
0
50
Setup
12
6
Tim
e
Picture Audio
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Standard
Normal
MENU
50
50
50
0
50
The PICTURE menu offers options to enhance and refine the picture displayed on your TV
based on ambient room light and personal preferences.
Adjustment options include contrast, brightness, color, tint, sharpness and color mode.
Press the MENU button on the remote control. Navigate using the ◄► buttons to select PICTURE.
Use the button to highlight Color.
Navigate using the ◄► buttons to
increase or decrease color intensity.
Use the button to highlight Tint.
Navigate using the ◄► buttons to adjust colors
toward green or reddish tint.
Use the button to highlight Sharpness.
Navigate using the ◄► buttons to soften or
view crisper edges in the picture.
Use the button to highlight Color Mode.
Navigate using the ◄► buttons to select COOL
(more bluish tone), NORMAL or WARM.
The default setting is NORMAL.
WARM mode will provide color that is calibrated
to D6500° Kelvin, the standard color that
broadcast stations and the Motion Picture
industry consider as the most accurate to
view programming.
Note:
When adjustments are completed, you may select another menu by pressing
the Menu button.
15
Move Adjust
Return
Move Adjust
Return
Move Adjust
Return
Move Select
Return
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
MEMC
Off
MEMC
Off
MEMC
Off
MEMC
Off
TV SETUP
AUDIO MENU
Audio
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Audio Language
Standard
English
MENU
50
50
0
Off
Picture Audio
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Standard
MENU
50
50
0
Off
Picture Audio
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Standard
MENU
50
50
0
Off
Picture Audio
How to Navigate:
Press the MENU button on the remote control. Navigate using the ◄► buttons to select AUDIO.
The AUDIO menu offers options to make sound enhancements while listening through the built-in
speakers and personal preferences.
Adjustment options include bass, treble, balance, surround, SPDIF Type and audio language.
Press the button to highlight SoundMode,
then press the ► button to select your sound
preference from 4 factory options:
STANDARD > MUSIC > MOVIE > USER.
The STANDARD setting is recommended for most
sound environments.
Depending on the surroundings in the room,
you may find one of the other options
more pleasing.
To make more critical audio adjustments based on your own preferences in USER:
Use the button to highlight Bass.
Navigate using the ◄► buttons to
increase or decrease low frequency intensity.
Use the button to highlight Treble.
Navigate using the ◄► buttons to
increase or decrease high frequency intensity.
SPDIF Type
PCM
Audio Language
English
SPDIF Type
PCM
Audio Language
English
SPDIF Type
PCM
16
Move Select
Return
Move Adjust
Return
Move Adjust
Return
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Standard
MENU
50
50
0
Off
Picture Audio
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Standard
MENU
50
50
0
Off
Picture Audio
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Standard
MENU
50
50
0
Off
Picture Audio
AUDIO MENU
Audio
How to Navigate:
Press the MENU button on the remote control. Navigate using the ◄► buttons to select AUDIO.
The AUDIO menu offers options to make sound enhancements while listening through the built-in
speakers and personal preferences.
Adjustment options include bass, treble, balance, surround ,SPDIF Type and audio language.
Note:
When adjustments are completed, you may select another menu by pressing
the Menu button.
Use the button to highlight Balance.
Navigate using the ◄► buttons to adjust sound
towards the right or left speaker.
Use the button to highlight Surround.
Navigate using the ► button to turn the
dimensional surround effect ON or OFF.
(for built-in speakers only).
Use the button to highlight Audio Language.
Navigate using the ◄► buttons to select to listen
to an alternative language broadcast
(if available) English > Spanish > French.
You may select an alternative language using
the remote control by pressing MTS)
Audio Language
English
SPDIF Type
PCM
Audio Language
English
SPDIF Type
PCM
Audio Language
English
SPDIF Type
PCM
Setup
12
6
Tim
e
Sound Mode
Bass
Treble
Balance
Surround
Standard
MENU
50
50
0
Off
Picture Audio
Audio Language
English
SPDIF Type
PCM
Use the button to highlight SPDIF Type.
Navigate using the ► button to adjust.
17
Move Select
Return
Move Select
Return
Move Adjust
Return
Move Select
Return
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
TIME MENU
12
6
Tim
e
Setup
Sleep Timer
Time Zone
Daylight Saving Time
MENU
Picture
Off
Pacific
Off
12
6
Tim
e
Audio
Setup
Sleep Timer
Time Zone
Daylight Saving Time
MENU
Picture
Off
Pacific
Off
12
6
Tim
e
Audio
Setup
Sleep Timer
Time Zone
Daylight Saving Time
MENU
Picture
Off
Pacific
Off
12
6
Tim
e
Audio
Press the MENU button on the remote control. Navigate using the ◄► buttons to select TIME.
How to Navigate:
The TIME menu includes adjustment of settings for your local time zone and daylight savings time.
The clock will adjust automatically after the initial Channel Auto Scan of available broadcast
channels in your area.
Note:
When adjustments are completed, you may select another menu by pressing
the Menu button.
Use the button to highlight SleepTimer,
then press the ► button to select among:
5min, 10min, 15min, 30min, 45min, 60min,
90min, 120min, 180min, 240min and off.
Use the button to highlight TimeZone,
then press the button to select among:
EASTERN > CENTRAL > MOUNTAIN >
PACIFIC > ALASKA > HAWAII.
Use the button to highlight
Daylight Saving Time.
Navigate using the ◄► buttons to turn
this feature on or off.
18
Move Select
Return
Move Select
Return
Move Select
Return
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
SETUP MENU
Setup
Lock
12
6
Time Channel
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
12
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
MENU
Picture
Off
Wide
Middle
Setup
Audio
Off
Lock
12
6
Time Channel
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
12
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
MENU
Picture
Off
Wide
Middle
Setup
Audio
Off
Lock
12
6
Time Channel
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
12
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
MENU
Picture
Off
Wide
Off
Setup
Audio
Off
1212
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
MENU
Picture
Off
Wide
Middle
Setup
Audio
On
1212
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
MENU
Picture
Off
Wide
Middle
Setup
Audio
Off
Are you sure ?
No
Yes
Press the MENU button on the remote control. Navigate using the ◄► buttons to select SETUP.
How to Navigate:
In the SETUP menu you may change the initial set up of preferences that include settings for
language, menu display, computer monitoring, closed captions, enhancement of black detail
in the picture and resetting your TV back to its factory default status.
Use the button to highlight Menu Language,
Press the ► button to select the language
you prefer among English, French and Spanish.
Use the button to highlight Noise Reduction.
Navigate using the ◄► buttons to reduce video
noise: Middle > Strong> Off > Weak
Default setting: Middle)
Use the button to highlight Transparency.
Navigate using the ◄► buttons to turn Off or On
the translucent effect of the OSD.
Use the button to highlight XVS.
Navigate using the ◄► buttons to select:
Off > On. XVS provides noticeable black detail
enhancement that may be preferred.
When
prompted,
Select "Yes"
to confirm.
Use the button to highlight Zoom Mode.
Navigate using the ◄► buttons to select the
viewing mode: Normal > Wide > Zoom > Cinema.
Use the button to highlight Restore Default.
Press the ► button to automatically set all
adjustments back to their original settings.
19
Move Select
Return
Move Select
Return
Move Select
Return
Move Select
Return
Lock
12
6
Time Channel
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
12
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
MENU
Picture
Off
Normal
Middle
Setup
Audio
Off
Move Select
Return
Move Next Return
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
SETUP MENU
Setup
12
6
Time
CC Mode
Basic Selection
Advanced Selection
Option
Off
Move
MENU
Picture
CC 1
Service 1
Setup
Audio
Select
12
6
Time
CC Mode
Basic Selection
Advanced Selection
Option
Off
Move
MENU
Picture
CC 1
Service 1
Setup
Audio
Select
12
6
Time
CC Mode
Basic Selection
Advanced Selection
Option
Off
Move
MENU
Picture
CC 1
Service 1
Setup
Audio
Select
12
6
Time
CC Mode
Basic Selection
Advanced Selection
Option
Off
Move
MENU
Picture
CC 1
Service 1
Setup
Audio
Next
12
6
Time
Mode
Font Style
Font Size
Font Edge Style
Font Edge Color
FG Color
BG Color
FG Opacity
BG Opacity
MENU
Picture
Setup
Audio
Custom
Default
Default
Default
Default
Default
Default
Default
Default
Move
Select
TV SETUP
Lock
12
6
Time Channel
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
12
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
Move Next
MENU
Picture
Off
Wide
Off
Setup
Audio
Off
The SETUP menu includes adjustments for activating the Closed Caption feature for display
on the television and customizing CC display types and font styles.
How to Navigate:
Press the MENU button on the remote control.
Navigate using the ◄► buttons to select SETUP.
Press the button to highlight Closed Caption
then press the ► button to select from the
following options.
Use the button to highlight Advanced
Selection. Navigate using the ◄► buttons
to select Service 1 - 6.
Use the button to highlight CC Mode.
Navigate using the ◄► buttons to select
Off > On > CC on Mute.
Use the button to highlight Option.
Press the ► button to enter a menu with options
to cus tomize text fonts, colors and opacities.
Use the button to highlight Basic Selection.
Navigate using the ◄► buttons to select
CC 1-4, Text 1-4.
Note:
When adjustments are completed, you may select another menu by pressing
the Menu button.
20
Return
Return
Return
Return
Return
Return
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
SETUP MENU
Setup
Setup
12
6
Tim
e
Picture Audio
Clock
Phase
Auto
Move Adjust
MENU
50
20
50
20
H - pos
V - pos
Setup
12
6
Tim
e
Picture Audio
Clock
Phase
Auto
Move Adjust
MENU
50
20
50
20
H - pos
V - pos
Setup
12
6
Tim
e
Picture Audio
Clock
Phase
Auto
Move Adjust
MENU
50
20
50
20
H - pos
V - pos
Setup
12
6
Tim
e
Picture Audio
Clock
Phase
Auto
Move Next
MENU
50
20
50
20
H - pos
V - pos
Lock
12
6
Time Channel
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
12
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Close Caption
XVS
Restore Default
English
Move Next
MENU
Picture
Off
Normal
Off
Setup
Audio
On
Setup
12
6
Tim
e
Picture Audio
Clock
Phase
Auto
Move Adjust
MENU
50
20
50
20
H - pos
V - pos
In the SETUP menu you may adjust the position of images displayed on screen once you connect
an input signal from your PC. Recommended resolution is 1920 x 1080.
If your PC system uses a standard signal mode, the screen will adjust automatically.
Connect an optional 3.5mm audio cable for stereo sound.
How to Navigate:
After connecting to a PC, press the SOURCE button and highlight VGA, then press the ENTER
button.
Press the MENU button on the remote control
and navigate using the ◄► buttons to select
SETUP. Press the button to highlight
Advanced, then press the ►button to select
from the following options.
Use the button to highlight Clock.
Navigate using the ◄► buttons to control the
width of the image.
Use the button to highlight H-POS.
Navigate using the ◄► but tons to adjust the
position of images displayed from side to side.
Use the button to highlight Phase.
Navigate using the ◄► buttons to improve focus
and image stability.
Use the button to highlight V-POS.
Navigate using the ◄► buttons to adjust the
position of images displayed up and down.
Use the button to highlight AUTO.
Press the ► button to automatically adjust the
display to the best setting.
21
Return
Return
Return
Return
Return
Return
Advanced
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
Lock
LOCK(PARENTAL) MENU
Setup
12
6
Tim
e
Picture Audio
Enter Password
MENU
0 9~
Setup
12
6
Tim
e
Picture Audio
Change Password
System Lock
US
Canada
Reset RRT
RRT Setting
Select
MENU
On
Move
Setup
12
6
Tim
e
Picture Audio
Change Password
System Lock
US
Canada
Reset RRT
RRT Setting
Next
MENU
Off
Move
Setup
12
6
Tim
e
Picture Audio
Enter New Password
Confirm Password
MENU
0 9~
In the LOCK(PARENTAL) menu you may block television by inputting passwords.
To gain access and select your preferences within the LOCK(PARENTAL) menu
make certain your input is set to TV.
Press the MENU button on the remote control. Navigate using the ◄► buttons to select LOCK.
How to Navigate:
Press the button to highlight
Enter Password. Enter your 4 digit code
(factory default code is "0000")
unless previously changed.
Use the numeric buttons to input a new
4 digit code by two times.
To change the password, press the ► button
to display a screen to enter your new password,
then confirm again.
To make changes to PARENTAL controls,
Highlight SYSTEM LOCK then press
the ► button to ON.
NOTE:
RRT Setting and Reset RRT are not user's adjustable settings.
22
Return
Return
Return
Return
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
Lock
LOCK(PARENTAL) MENU
Setup
12
6
Tim
e
Picture Audio
TV
MPAA
Move
MENU
N A
Select
Setup
12
6
Tim
e
Picture Audio
TV
MPAA
Move
MENU
N A
Next
Setup
12
6
Tim
e
Picture Audio
MENU
Lock Press ENTERto lock or unlock
TV RATING
TV Y
TV Y7
TV G
TV PG
TV 14
TV MA
ALL FV V S L D
Next Move
N/A
In the LOCK(PARENTAL) menu you may block television and movie programming based on
U.S TV and movie rating guidelines. To gain ac cess and select your preferences
within the LOCK(Parental) menu make certain your input is set to TV.
How to Navigate:
Press the MENU button on the remote control. Navigate using the ◄► buttons to select LOCK
(Parental).
Press the button to highlight ENTER PASSWORD. Enter your 4 digit code
(factory default code is "0000") unless previously changed.
To set parental controls for television programming or DVD movies, press the ▲▼buttons to
highlight US. Navigate using the ◄► buttons to highlight TV/MPAA menu.
Highlight TV, then press the ► button to enter the TV Ratings menu to select your preference.
Highlight MPAA then press the ► button repeatedly to select your movie rating preference.
23
Return
Return
Return
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
Lock
LOCK(PARENTAL) MENU
Setup
Canada English
Canada French
Move
Select
MENU
Picture Audio
12
6
Tim
e
E
E
Setup
Canada English
Canada French
Move
Select
MENU
Picture Audio
12
6
Tim
e
E
E
In the LOCK(PARENTAL) menu you may block television and movie programming based on
Canadian TV and movie rating guidelines. To gain ac cess and select your preferences
within the LOCK(Parental) menu make certain your input is set to TV.
How to Navigate:
Press the MENU button on the remote control. Navigate using t he ◄► buttons to select LOCK.
Press the button to highlight ENTER PASSWORD. Enter your 4 digit code
(factory default code is "0000") unless previously changed.
To set parental controls for television programming or DVD movies, press the ▲▼ buttons to
highlight Canada.Navigate using the◄► buttons to highlight Canada English/Canada French menu.
Navigate using the button to highlight CANADA ENGLISH, then press the ► button repeatedly
to select your ratings preference.
Navigate using the button to highlight CANADA FRENCH, then press the ► button repeatedly
to select your ratings preference.
NOTE:
When adjustments are completed, you may select another menu by pressing
the Menu button.
24
Return
Return
Lock
Channel
Lock
Channel
TV SETUP
TV(CHANNEL) MENU
Channel
Setup
12
6
Tim
e
Picture Audio
Air /Cable
Auto Scan
Favorite
Channel No
Channel Lable
DTV Signal
Air
Move Nxet
MENU
50 3
KOCE LB
Good
Setup
12
6
Tim
e
Picture Audio
Move Press ENTER change
MENU
Channel Channel Name Favorite
ATSC 1
ATSC 2
ATSC 3
KOCE HD
KOCE SD
KOCE LB
2 0
14 1
14 2
14 3
50 1
50 2
66 0
50 3
Prev Next
Setup
12
6
Tim
e
Picture Audio
Air /Cable
Auto Scan
Favorite
Channel No
Channel Lable
DTV Signal
Air
Move Next
MENU
50 3
KOCE LB
Good
Setup
12
6
Tim
e
Picture Audio
Move Press ENTER change
MENU
Channel Channel Name Add/Delete
Prev Next
66 0
ATSC 1
ATSC 2
ATSC 3
KOCE HD
KOCE SD
KOCE LB
2 0
14 1
14 2
14 3
50 1
50 2
50 3
Setup
12
6
Tim
e
Picture Audio
Air /Cable
Auto Scan
Favorite
Channel No
Channel Lable
DTV Signal
Air
Move Next
MENU
50 3
KOCE LB
Good
Setup
12
6
Tim
e
Picture Audio
Select Move
MENU
K B B C - D T
The TV(CHANNEL) menu provides for the setup of your television to receive TV channels, store
your favorites, add or skip channels and label them by their call letters.
How to Navigate:
Press the MENU button on the remote control. Navigate using the ◄► buttons to select TV.
Press the button to highlight your preferences.
Highlight FAVORITE to add channels to your Favorites List. Navigate using the ▲▼◄► buttons
to select channels to be added or deleted from your list. Press the ENTER button to add or delete
a channel. A checkmark indicates a channel has been added. You may also display your favourite
list from the remote control by pressing FAV.
Highlight to select Show/Hide or skip channels already in memory. Navigate using the ▲▼◄►
buttons to access the list of available channels. Press the ENTER button to change the channels
status. A checkmark indicates a channel has been added.
Highlight CHANNEL LABEL to name or rename a broadcast channel. Navigate using the ► button
to enter the screen menu to re-label a channel. Use the ▲▼buttons to spell out each letter,
number or character. Use the ◄► buttons to advance to the next space.
25
Show/Hide
Show/Hide
Show/Hide
Return
Return
Return
Return
Return
Return
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
Lock
Channel
TV SETUP
ZOOM MODE
1 NORMAL.
2 WIDE.
3 ZOOM.
4 CINEMA.
Press the MENU button on the remote control.
Navigate using the ◄►buttons to select SETUP.
Use the button to highlight Zoom Mode.
Navigate using the ◄► buttons to select the
viewing mode: Normal > Wide > Zoom > Cinema.
Recommended for viewing native
widescreen content and
undistorted 4:3 images.
(With Black Bars)
Stretches certain 4:3 content and
may reduce the black bars.
Stretches the image both vertically
and horizontally to fill the screen
when viewing widescreen content.
The zoom effect will crop images
somewhat.
When viewing 4:3 content,
Cinema mode will fill the entire
screen eliminating the side black bars.
It may also eliminate or reduce black
bars on certain widescreen movies.
26
Lock
12
6
Time Channel
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advance
Close Caption
XVS
Restore Default
English
Move Select Exit
MENU
Picture
Off
Normal
Off
Setup
Audio
On
12
6
Time
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Close Caption
XVS
Restore Default
English
MENU
Picture
Off
Normal
Off
Setup
Audio
On
Move Select
Return
Lock
Channel
DISPLAY MODE
PC FORMATS
H i o aor z nt l
S
c ning F eq enan r u cy
Resolution
(
kHz
)
Ve rt
c l
i
a
Sc n n e e
an i g Fr qu ncy
(Hz)
Form at
640 480
00 6
008
00 6 0
8 0
024
6
81 7
31.5
X
X
X
X
NOTE:
This product does not support the display mode not listed above.
In order to achieve the best display effect, please select the above-listed
5 display modes input signal.
Because of the difference of display drivers output signal
(especially non-standard signal output), the display image may appear little
disturbance which can be adjusted on the PC menu.
To prolong this unit's service life, please set your computer to power management mode.
27
6.6 6
1920 x 1080
DISPLAY MODE
VIDEO FORMATS
SUPPORTED COMPONENT/ HDMI INPUT MODE
Horizontal
Scanning Frequency
Vertical
Scanning Frequency
Format
(Hz)
720 480
720 480
1280 720
1280 720
1920 1080
31.47
15.734
37.5
45
31.25
33.75
59.94
59.94
50
60
50
60
480 p
480 i
1080 i
720 p
720 p
1080 i
e
iR so lut
on
X
X
X
X
The above listed formats are also related to the AV devices you are about to connect.
Before you connect this unit with others please read all instructions carefully and
make sure all necessary cables are connected.
This unit may be incompatible with some other formats which are not meet the
above conditions.
NOTE:
1920 1080
X
X
1920 1080
X
1920 1080
X
1080 p
1080 p
1920 1080
X
1080 p
50
60
24
27
56.25
67.50
28
( kHz )
3840 x 2160
67.50
30
2160P(Only HDMI)
SPECIFICATION
50" 4K2K LED TV
Panel Type LED Panel
50 inches
Diagonal Size
Screen Format 16:9
Color System
ATSC/QAM/NTSC
ModelDescription
Panel
Resolution
View Angle
Response Time
Contrast
Brightness
Maximum Color
250 nit
1.07G colors
Sound Output
RF Input 75 ohm external terminal
HDMI Input
Video 480i 480p 576i,576p, 720p 1080i,1080p,4K2K 30Hz.: , , ,
Audio Two channel linear PCM32 441 and 48kHz 16 20 and 24bits: , . , ,
PC RGB Input-
D sub 15pin-
G 0 7Vp p 75 ohms: . - ,
B 0 7Vp p 75 ohms: . - ,
R 0 7Vp p 75 ohms: . - ,
Power Requirement
Input /
Output
Jacks
Systems
Power
Sound System
M
Audio System
MTS
L/RSpeaker:8W
+
8W
Composite Video Input
Component / YPbPr Input
Sound Input
PC AUDIO: For PC RGB Audio input
500mV rms, Impedance: 20k ohms
RCA
Y:1.0 Vp-p, 75 ohms, 0.3V negative sync
Pb:0.7Vp-p, 75 ohms
Pr : 0.7Vp-p, 75 ohms
120V ~ 60Hz
176(H)/176(V)
150W
This manual is only for your reference.
Specifications are subject to update without prior notice.
1.0 Vp-p, 75 ohms RCA
AV AUDIO: For CVBS Audioinput
Component AUDIO: For Component Audioinput
29
8ms
Refresh Rate
120Hz
Rated power consumption
5000:1
3840 x 2160
SYMPTOM CAUSE ANDREMEDY
( )
TV
Bad
Picture
(snow,
multiple
images
distortion,blurry)
No sound.
Black
and
White
picture.
No picture or sound.
Coloredpatchesof
picture.
Panelfunctionkeydoes
not respond correctly.
Checkthe location of the antenna and adjust it if necessary.
Makesure the antenna cable is firmly connected.
Makesure all input cables are firmly connected.
Increasethe volume.
Checkthe PICTURE setting within the PICTURE menu.
Makesure the unit is plugged in and turned on.
Makesure that the ATV mode is selected.
Try a new channel to check for possible station trouble.
Makesure the antenna is connected properly.
Increasethe volume.
Makesure all cables are firmly connected.
Checkfor local interference.
Makesure there are no unshielded electrical devices nearby
that are causing interference.
Turn theTV off for 30 minutes, then try it again.
Under the influenceof electrostatic phenomenon, the product
may malfunction and require usertopowerreset.
Unplugand re-plug theAC power cord.
TROUBLESHOOTING GUIDE
Checkto make sure the program you are watching is broadcast
in Color and not Black & White.
Check
whether the mute function has been activated on the
Remote Control.
The display monitor's
panel goes hot.
LEDTV takes inside lighten phosphor. It may increase the
temperature of the screen in some occasions. It's not a defect.
Unusual dots
Black dots and Bright points may appear on the LED screen.
This is a structural property of the LED panel and is not a defect.
Stripes on screen
Adjust the impulse phase may decrease stripes.RGB in
The top of the monitor
It may occur during long-time working. It's not a defect.
gets hot
.
Make sure the antenna or audio/video source device is
working properly.
Unable to select a
certain channel.
The channel may be skipped. Choose this channel by
directly selecting the buttons from the remote control.
Disorder display
at power on.
This may be caused because of a very short interval
between POWER OFF and ON.
Unplug the power and restart.
30
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for RCA RLDED5099-UHD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of RCA RLDED5099-UHD in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info