39222

Raytheon NAV398GPS LORAN Manual

61
Zoom out
Zoom in
Previous page
1/74
Next page
program and use your own entered value for the variation by selecting the
1
MANUAL VARIATIONlsof&ey .
When
the1
MANUAL
VARIATIONI
key is pressed, you must first decide
whether the direction of the variation is East or West. The direction already
selected is displayed at the left side of the screen. Press
thmsoftkey
if the
direction should be changed and then press
thmdkey.
“00”
appears next
to the direction character.
Now type the numeric value of variation and
press[wi
The unit will
now be in magnetic mode, but using a fixed variation value. When
the//[
key is pressed, the entered variation will now be applied to all Course and
Bearing readouts. Press
thejjkey
and you will shift back to the mMain
menu directory.
Press-[
a second time to get back to the last used
display mode.
3.10.4.2 Position Corrections- Loran
The NAV 398 unit has Position corrections that are available for use with
Loran-C navigation and corrections that apply to GPS navigation. If you
happen to be using both senors in your system, the menus that appear on the
screen will be determined by the sensor that is currently selected for use. To
apply corrections to the loran L/L you will need to be sure the unit is in the
loran mode. Conversely, be in GPS mode to do GPS corrections.
The NAV 398 includes automatic correction programing for both the Loran
and the GPS modes and these programs are normally operating when the unit
comes from the factory.
Loran Position Corrections
When the loran sensor measures the loran signal time differences, the TD’s
received are rarely perfect by the time they reach your boat. They usually
contain some errors to signal timing developed as the signals travel across
land due to various distortions of the terrain along the path of the radio waves.
Fortunately, the error values are generally known for most of the loran
coverage areas and a table of corrections (ASF) is built into your loran
sensor.The ASF program helps to correct the loran time differences so the
Lat/Lon readouts will match marine chart coordinates and your GPS more
closely.
The NAV unit only uses
Lat.&on
for waypoint navigation calculations.
When navigating to and from waypoints, the loran performs its bearing and
distance, TTG, XTE calculations by comparing the
Lat/Lon
values. Upon
OPERATION 3-49
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raytheon NAV398GPS LORAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raytheon NAV398GPS LORAN in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info