39222

Raytheon NAV398GPS LORAN Manual

41
Zoom out
Zoom in
Previous page
1/74
Next page
alarm is initially set to 0.10 nm from the factory to provide an arrival alert in
the event that one is not set by the operator.
3.7.2 The Anchor Alarm
The anchor alarm is intended to be used to monitor your vessel’s position
while at anchor. If the vessel begins to drift beyond the entered distance of
the anchor alarm, the alarm wiII sound off and notify the crew of the possible
dragging of the anchor.
The distance value to input for the an-
*-
char alarm zone depends on many fat- tEioR,
)
tors, such as the amount of anchor line
+-+
J
EVENT
,WAYPOINT
out and the depth, the proximity of other
\
t
:
objects or vessels, and weather
condi-
\
I9
‘4
c
/AlARh4S
SOUNDS WHEN
tions. However, the incremental
dis-
VESSEL CROSSES ZONE
tance that can be entered is 0.01 nautical
mile steps which is equivalent to approximately 60 feet or 18 meters per step.
The first task, when entering an anchor watch alarm, is to press
thd-[
key as you drop anchor to store your present position as a waypoint. Make
a mental note of the EVENT memory # (number), The number appears for
approximately 3 seconds on the
dispIay
and certainly is the last used
waypoint. If you miss seeing the number, just check the
waypoint
list. The
stored Event will be the highlighted waypoint on the list.
Press thepALM/ key. Press the
-1
softkey.
Use the numeric keys
to enter the drift limit distance. Input values can range
from
.Ol
to 9.99
nautical miles.
Pres$mJwhen
the value is correct to set the anchor watch
alarm.
Now press
thdm[
key, and enter the EVENT # that you’ve just saved
to be your destination
waypoint
and then
press-1
The anchor watch is
now set and will be monitoring the anchor drop point.
Example:
To set an anchor limit of 100 yards, (.05nm at 2000 yd/nm),type
0, S.JZFZiZlfor .05nm (300 feet).
In the event that you drift beyond the distance set for the anchor watch alarm,
the audio beeper will sound and the ANC characters will be indicated
on-screen in the alarm warning area.
PressvIto
silence the audible
alarm.
OPERATION 3-28
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raytheon NAV398GPS LORAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raytheon NAV398GPS LORAN in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info