39222

Raytheon NAV398GPS LORAN Manual

37
Zoom out
Zoom in
Previous page
1/74
Next page
3.6.4.3 Storing by Bearing/distance
Occasionally, you may wish to enter a waypoint into memory by describing
the waypoint’s position as a bearing and distance from your own current
position. This is easily accomplished with your NAV unit.
However, while describing a range or distance from your vessel should not
be a problem, it is important to make sure your “bearing” information is in
“magnetic” IF the magnetic variation is “ON”.
If you wish to enter a
waypoint
position as a bearing and range from your
present position, press the
lBEARING/DISTANCE
1
softkey
on the STORE
WAYPOINTTYPE
menuscreen.
First, type the numeric value of the BEARING
lsroRE
WAywtHT
BID1
(BRG)
information. Begin the entry with
“0”
if the
WPT
~02
bearing is less than 100’.
Presdmlwhen
the
N 42’42.10’
bearing value is displayed correctly.
W
072O
10.66’
Example:
Press
0,4,5,
-1
for
0
---
--.-
Bearing = 45’
Now
the
DISTANCE
(RNG)
can be entered using three digits (up to 99.9). If
the range is less than 10.0 miles, type a
“0”
first, followed by the remaining
two digits. Press
-1
when the
DISTANCE
value is displayed correctly.
Example:
Press
0,6,4,-i
for Range = 6.4 nm.
If you make an error entering the numeric value, press
t.hejj[
key.
Then retype the correct value.
When
[B]
is pressed, the display will calculate a L/L to store as the
waypoint. During this time, the unit will display a
"CALCULATING" message.
Please wait for the message to disappear before continuing to the next
operation. The screen will change back to the Waypoint Directory.
3.6.5
Waypoint
List Operations
As mentioned earlier, the
Waypoint
List lets you scan through the contents
of the waypoint memories. You can select any of the stored waypoints to
Edit, Copy, Protect, Measure or Erase from this page. In addition the
waypoint list, which is normally arranged in sequential memory # order, may
be re-sorted alphabetically by name for ease in locating specific waypoints
using
themsoftkey.
OPERATION 3-24
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raytheon NAV398GPS LORAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raytheon NAV398GPS LORAN in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info