23303
14
Zoom out
Zoom in
Previous page
1/31
Next page
Chapter 2: Transducer Installation
11
2. Run the transducer cable back to the instrument. Avoid fluorescent
lights, engines, radio transmitting equipment and the speed
transducer cable. The transducer cable should also be kept clear of
bilge's, where possible, and be secured at regular intervals.
Note:
The transducer cable must not be shortened. Shortening
of this cable will affect the performance of the unit. For further
information, please contact Autohelm or an authorised agent.
If the bronze through hull (Z118), in hull puck (Z117) or retractable depth
(Z120) transducers are to be used, the following modification must be
carried out to the transducer lead.
1. Using a pair of wire cutters, remove the moulded plug from the end
of cable.
2. Strip the outer cable back 38mm (1.5in).
3. Using a pair of cable strippers, remove 10mm (3/8in) of insulation
from each wire.
4. Using a suitable crimping tool, attach a 1/8in spade connector
(supplied) to each of the wires.
5. Connect the wires to the instrument in accordance with the following
table.
Transducer type Colour coding (cable to unit
)
Bronze through hull
(Z118)
Blue Ð red terminal
Black and screen Ð white
terminal
In-hull puck (Z117) As above
Retractable depth
(Z120)
As above
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine ST30_DEPTH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine ST30_DEPTH in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info