469996
20
Zoom out
Zoom in
Previous page
1/29
Next page
16 Digital Radome Scanner - User Guide
System checks
System check
Before performing any functional tests, make sure:
All securing bolts are fully tightened and mechanical locking washers
as specified are in place.
All connections have been made.
All connecting wires are secured and protected as necessary.
If you have installed the radar yourself, ask your local Raymarine autho-
rized installation dealer to check the installation.
Set up, alignment and timing checks
Switch on and initial set up
1. Press and hold the POWER key of your multi-function display unit until
the unit beeps. The magnetron warm-up sequence should start, after
which the unit should enter standby mode.
2. Power on the Digital Radome scanner, using the relevant softkey on
your multi-function display.
3. If necessary, adjust the brightness on your multi-function display unit.
4. If necessary, change the default language settings.
Transmission check
Ensure that all personnel are clear of the scanner and switch to transmit
mode. Run through the radar operations as described in the relevant multi-
function display unit’s Owner’s Handbook and check that all the expected
data is displayed.
Bearing alignment
With the system correctly installed, check the bearing alignment to ensure
that targets appear at their correct bearing relative to the boat’s bow.
Adjust the alignment as necessary.
Display timing adjustment
It is advisable to check the display timing before using the system for navi-
gation. For instructions on how to do this, refer to the installation guide for
your multi-function display.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine RD424D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine RD424D in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info