469997
19
Zoom out
Zoom in
Previous page
1/29
Next page
Installation 15
Securing the scanner to the mounting platform
Note:
The M8 bolts that secure the Digital Radome scanner to the
mounting platform require a torque of 20Nm (177lbf.in). Use the
supplied "Denso Paste" to lightly coat the mounting bolts.
To prevent damage to the base of the Digital Radome scanner, you must
not insert more than 25mm (1 inch) of each bolt in to the base of the
scanner, as shown in the following diagram:
Setting up the scanner
Before you go to sea
It is important to check the installation before you go to sea. This involves
aligning the scanner and checking the system timing, using your multi-
function display.
These checks are described in the following sections.
EMC conformance check
Always check the installation before going to sea to make sure that it is not
affected by radio transmissions, engine starting, etc.
FORWARD
D11363-1
Mounting platform
25 mm (1.0 inch)
maximum
D11368-1
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine RD418HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine RD418HD in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info