657000
81
Zoom out
Zoom in
Previous page
1/128
Next page
Chapter 5: Operation 71
A temporary waypoint is placed at the cursor position and navigation
proceeds towards it. The temporary waypoint is shown as a square with a
dot in the center and is connected to the vessels starting position by a
dotted line.
On arrival, the arrival alarm is sounded and the arrival pop-up box is
displayed. The dotted line is removed but the temporary waypoint
remains on screen until another GOTO or FOLLOW operation is started, or
the waypoint is removed.
Note: The temporary waypoint is not added to the waypoint list. If the
GoTo is stopped prior to completion or the temporary waypoint is
erased.
Go to a Port
You can navigate directly to the nearest port or to a selected port or
facility.
To navigate directly to selected port:
1. Press the GOTO key, select MORE, and then GOTO PORT to display the
Port List.
2. Use trackpad up/down to select the desired port and press ENTER to
start the GoTo, or CLEAR to cancel the operation.
A dotted line is drawn between the current vessel position and the target
waypoint which is placed at the port. The line remains fixed on the screen
as the vessel moves.
Bearing, Range and Cross Track Error are calculated for the target
waypoint in the same manner as for any other GoTo or Follow function.
On arrival, the arrival alarm is sounded and the arrival pop-up box is
displayed.
To navigate directly to the nearest port or facility:
1. Press the GOTO key and select MORE and then GOTO NEAREST to dis-
play the list.
The list shows the eight nearest places where the selected facility
exists, in order of distance. The bearing and range (in selected units)
for each one is shown.
2. Use trackpad up/down to select the desired destination and press
ENTER to start the GoTo, or CLEAR to cancel the operation.
The operation is conducted in the same manner as for GOTO PORT above.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine RC435i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine RC435i in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info