657000
77
Zoom out
Zoom in
Previous page
1/128
Next page
Chapter 5: Operation 67
Target Point Arrival
Target alarms (see Chapter 5) can be set up to sound when the vessel is
approaching the target point. The arrival alarm is defined as a circle (not
visible on the screen), with a specified radius around the target.
The alarm is triggered when either of the following conditions is met:
The distance to the target point is less than that specified for the
Arrival alarm.
The vessel reaches the closest point of approach to the target (it
crosses a line passing through the waypoint and perpendicular to the
track).
Once the alarm is triggered, the vessel goes towards the next waypoint in
the route. Press any key to cancel the arrival alarm.
The target becomes the origin, the next waypoint becomes the target
point and the two are connected by a dotted line indicating the current leg.
If the target waypoint was the subject of a GoTo, or was the last waypoint
in a route, the pop-up alarm is cleared.
Alter a Route
A route can be followed from a selected waypoint (Join a route) or, if
already following, advanced to the next waypoint. Also the XTE can be
restarted, setting the current vessel position as the new origin.
In addition, a selected waypoint can be moved as described in
Section 5.2, or removed from the route as described in Section 5.3.
Join a Route
To start following the current route from a selected waypoint:
1. Move the cursor over a route waypoint until the WAYPOINT OPTIONS
function is displayed.
2. Press ENTER and select FOLLOW FROM HERE.
D4718-1
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine RC435i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine RC435i in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info