467348
47
Zoom out
Zoom in
Previous page
1/116
Next page
Chapter 4: Menu Settings 47
Manual Position
If no GPS data is available and the MMSI number has been programmed, the “NO
GPS” icon does not appear, and POS DATA REQ is displayed on the dot matrix
display, followed by NO POS DATA. An alarm sounds for 5 seconds or until you
acknowledge by pressing any key.
The alert repeats every four hours as long as no position information has been
entered manually. If position data is entered manually but has not been updated
during the previous 23.5 hours, all the position (lat/lon) fields are set to all 9’s,
time field is set to all 8’s, and the display reverts to NO POS DATA.
Note:
The Manual Lat/Lon function is valid only when your radio is not connected to a
GPS receiver.
To manually set the GPS position and time settings:
1. Under the GPS SETUP menu, point the arrow to MANUAL POS.
2. Press in
CH/OK to accept. The Manual Position screen appears.The first char-
acter space in the latitude field is highlighted with a flashing underline.
A more detailed description of manual character entry can be found in “Add-
ing a new Entry“ on page 68.
3. Using the
CH/OK knob, scroll through available characters.
4. When the desired character appears, press
CH/OK to accept it. The next char-
acter to be filled in sequence is underlined (_).
Continue this process until all latitude data has been selected.
When the direction character is flashing, rotate the
CH/OK knob to toggle
between N and S, if necessary.
When complete, the first character in the longitude field is underlined and
flashing.
5. Using the
CH/OK knob, scroll through available characters.
6. When the desired character appears, press
CH/OK to accept it. The next char-
acter to be filled in sequence is underlined (_).
Continue this process until all longitude data has been selected.
When the direction character is flashing, rotate the
CH/OK knob to toggle
between E and W, if necessary.
When complete, the first character in the time field is underlined and
flashing.
7. Using the
CH/OK knob, scroll through available characters.
8. When the desired character appears, press
CH/OK to accept it. The next char-
acter to be filled in sequence is underlined (_).
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Ray49E Marine VHF Radio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Ray49E Marine VHF Radio in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info