When WX/INT key is pressed and held for over 2 seconds, one frequency mode
can be changed to the other frequency mode and Alerm 1 is heard.:
For example:
When USA mode is in use,it can be changed to CANADIAN mode by doing above
operation.
When Canadian mode, it can bew changed to International mode. When
International mode,it can be changed to USA mode. The last changed frequency
mode can be memorized.
When the power is turned on,the last memorized frequency mode can be
used.(Channel number is16CH at that time.)
1.3.6 To Transmit
1) Press the Push-To-Talk switch(PTT switch) and speak into the microphone using a
clear normal voice.
2) If the current channel is Weather CH or the Tx prohibited channel, PTT switch cannot
be used and Audible beep sound 2 is heard.
3) RAY53 is designed to meet the new FCC Rules Part 80.203, which states,if the PTT
switch is pressed continuously for over five minutes,transmission is forcibly inhibited.
If this occurs,audible beep sound 2 will be heard until the PTT switch is released.
1.3.7 To select a Weather Channel
1) Simply press the WX/INT,then use Channel Selection Knob or UP/DOWN key to
select the desired Weather Channel from 0 to 9. When this mode is selected,the
transmitter is always inhibited.
2) When the Weather CH is finished by pressing WX/INT key,the last used Weather CH
number is memorized
3) When the power is re-turned on,the memorized Weather CH number can be
activate on the Weather CH mode.
1.3.8 Priority Channel
1)When 16/9 is pressed and released, Alarm 1 is heard and Priority Channel is in use then
Channel Display(Small) shows “P” on the LCD.(“P” display means “Priority CH”.)
