Manual Raymarine RAY 106 (page 31 of 47) (English)

657009

Zoom out

Zoom in

1/47

2 6.0 Vdc H/L :H check 2 - 3W, 5W (Po 0.5W)

Table 5-2

Figure 5-5

5.3.5 Weather Alert Frequency Adjustment (RECEIVER)

1) Connect an RF signal generator to the antenna connector. Set the RF signal generator as

follows:

Frequency : 162.550 MHz with no modulation

Output level : 60 dB

2) Select the weather channel WX1.

3) Connect a frequency counter to TP1 on the CPU PCB and adjust RV102 to obtain 2100

Hz10 Hz on the frequency counter. (See Fig. 5-6.)

5.4 TROUBLESHOOTING GUIDE

Table 5-4 provides a general troubleshooting chart for use by a technician to isolate circuitry

failures to specific functional areas within the RAY106.

The first step in attempting to clear a problem associated with the general operation of this

radio is to perform a MASTER RESET. This can be done by simply holding down the 16PLUS

key while turning the radio on. This should be performed anytime a component or PCB within

the radio is replaced. This function will clear the memory of the 106 and return it to the original

factory settings, 16PLUS will automatically be reprogrammed to channel 16.

NOTE:

Micro-components within the radio are generally not field replaceable, therefore, repairs to the

radio typically go down to the PC board level only. A replacement parts list for the RAY106 can

be found in Section 6.

Item Symptom Possible Cause

1 Unit does not turn on. a. Defective power switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine RAY 106 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Raymarine RAY 106 Manual

Product: