Manual Raymarine RAY 106 (page 18 of 47) (English)

657009

Zoom out

Zoom in

1/47

3.3.2 The 16PLUS (priority) Channel

The 16plus priority channel has been preset to CH16 prior to shipment from the factory.

However, an alternate working channel can be selected as the priority channel if desired, using

the procedure below.

1) Press the 5/6 channel keys to select the desired channel.

2) Press and hold the 16plus key for three seconds. An audible beep tone will confirm that the

selected channel is stored in memory as the new priority channel.

3) To reprogram CH16 as the 16plus channel, repeat steps 1 and 2 for CH16. WX channels

cannot be programmed as the priority channel.

3.3.3 Memory Key Functions

The MEM key is used to program channels into memory for Memory Scan and Memory seek

functions, and for the Memory Recall function.

• To program a channel into memory, select the channel to be stored using the 5/6

channel keys. Press and hold the MEM key for about 2 seconds. The MEM indicator will

appear on the display, and a beep tone will confirm that the channel has been stored to

memory. There is no limit to how many channels can be stored to memory.

• To clear a channel from memory, select the channel to be cleared using the 5/6

channel keys. Press and hold the MEM key for about 1 second. The MEM indicator will no

longer be shown on the display and a beep tone will confirm that the channel has been

erased from memory.

• To review the memorized channels (Memory Recall), press the MEM key twice. The

channels that have been stored into memory will be displayed in sequence on the LCD for

review.

3.3.4 Memory Reset

To clear all channels from memory, and reset the 16plus key to it’s factory default channel

(CH16), hold the MEM key down while turning the radio ON.

3.3.5 All Scan and Memory Scan Modes

1) All Scan

Press the SCAN/SEEK key, to activate the All Scan mode. The SCAN indicator will appear

on the display and the RAY106 will sequentially scan all of the channels in the selected

frequency mode (U.S., INT, or Canada).

• If a signal is received, the scanning will stop until the station clears. After 5 seconds,

scanning will resume. If the scanning has stopped on a received signal, press the

SCAN key again to continue. To cancel the SCAN mode, press the SCAN key.

• If the scanning has stopped on a channel with traffic, and you wish to communicate

with the other party, press the PTT switch to cancel the SCAN mode and remain on

that channel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine RAY 106 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Raymarine RAY 106 Manual

Product: