469999
22
Zoom out
Zoom in
Previous page
1/30
Next page
18 Radome Scanners - Users Guide
Inter-unit cable connections
The illustration below details the connections for the inter-unit cable:
Scanner setup
Before you go to sea
After you have installed your radar, and before you go to sea, it is impor-
tant to check the installation. You can then set up the radar system, align
the scanner and check the system timing.
Set up, alignment and timing checks are performed from the radar system
display unit. The procedures are outlined on this page; full details are avail-
able in the relevant display unit Owner’s Handbook. You should read this
and familiarize yourself with the operation of the radar.
EMC conformance
Always check the installation before going to sea to make sure that it is not
affected by radio transmissions, engine starting, etc.
System checks
System check
Before performing any functional tests, make sure:
All securing bolts are fully tightened and mechanical locking devices as
specified are in place.
All connections have been made.
All connecting wires are secured and protected as necessary.
If you have installed the radar yourself, ask your local Raymarine autho-
rized installation dealer to check the installation.
1
2
35
4
7
10
11
86
9
13 12
Black
White
Orange
Black
Black
Green
Yellow
Shield
Red
Red
Violet
Blue
Grey
Video
Video RTN
*Battery --ve
Tx Trigger +
Battery --ve
Data I/O +
Tx Trigger --
Battery +ve
Data I/O --
*Battery +ve
Azimuth +
Azimuth --
1
2
3
4
5
6
7
8
9
10
11
12
13
White
Black
Orange
Yellow
Green
Blue
Violet
Grey
Red
Red
Black
Black
8
7
6
5
4
3
2
1
Video
Video Rtn
Tx Trigger +
Tx Trigger --
Data I/O +
Data I/O --
Azimuth +
Azimuth --
Battery +ve
*Battery +ve
*Battery --ve
Battery --ve
Not fitted on
Open Array Scanners
(refer to Section 2.2)
Front view of
Display Cable Connector
Front view of Radome
Scanner Cable Connector
Display Scanner
* Not present on 'light', 11 core cables.
Battery +ve/--ve = 12 or 24v.
D8866_1
2
1
4
3
6
5
8
7
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine Radome Scanners at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine Radome Scanners in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info