656877
14
Zoom out
Zoom in
Previous page
1/18
Next page
14 CR Hydraulic Pump - Installation Guide
Make the following connections:
1. CR pump motor supply:
using appropriate cables connect the CR pump motor to the boats power
supply, via an appropriate circuit breaker and fuse. (see Table below)
2. Solenoid control valves using suitable cable (at least 16 AWG or 1.5 mm2 for
runs up to 16 m/52 ft.):
for the Aside: connect the positive core to the
MOTOR A
terminal and
the negative core to one of the
SOLENOID (-)
terminals at the course
computer
for the “B” side: connect the positive core to the
MOTOR B
terminal and
the negative core to the other
SOLENOID (-)
terminals
3. Using a pair of cables, connect the motor relay control terminals on the pump
to the course computer
CLUTCH
terminals
WARNING: CLUTCH VOLTAGE
To avoid damaging your CR pump, you MUST set the CLUTCH
VOLTAGE fuse on your course computer to 12 v. This applies even
on 24 v motor systems.
Note:
If installing the pump on a boat with mechanical steering, you also need to connect
a bypass valve to the
CLUTCH
terminals (see page 15).
Pump motor cable length
(distribution panel to pump)
Cable gauge
(AWG)
Copper area
(mm
2
) Fuse Rating
12v CR pumps
up to 3 m (10 ft.)
up to 7 m (23 ft.)
up to 16 m (52 ft.)
10
8
6
6
10
16
70 A
24v CR pumps
up to 3 m (10 ft.)
up to 5 m (16 ft.)
up to 10 m (32 ft.)
up to 16 m (52 ft.)
12
10
8
6
4
6
10
16
40 A
87039_2.fm Page 14 Wednesday, April 9, 2014 2:56 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine M81126 Constant Running Hydraulic Pump at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine M81126 Constant Running Hydraulic Pump in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info