470000
25
Zoom out
Zoom in
Previous page
1/36
Next page
2.3 Post installation procedures
Before using the product, carry out the following:
Mechanical checks.
Switch on and initial setup.
Mechanical checks
Before switching on the HD Digital Radome Antenna:
Ensure that:
All securing bolts are fully tightened and the appropriate
mechanical locking washers are in place.
All connections are securely made.
All connecting cables and wires are secured and protected as
necessary.
Ask your local Raymarine authorized installer to check the
installation.
Switch on & initial setup
Use the information given here in conjunction with the relevant
information in your multi-function display (MFD) documentation, to
switch on, and to carry out the initial checks and setup tasks.
1. Press and hold down the power key of your MFD until the unit
beeps.
The magnetron warm-up sequence should then start. When the
warm-up is complete, the unit should enter standby mode.
2. Use the appropriate soft key on your MFD to power on the HD
Digital Radome Antenna.
3. If necessary, at the MFD:
adjust the MFD brightness.
change the default language settings.
4. Ensure that all personnel are clear of the antenna, then switch
to transmit mode.
5. Carry out the radar operations described in the relevant MFD
Owners Handbook and check that all functions appear to be
satisfactory.
6. Check the bearing alignment to ensure that targets appear
at their correct bearing relative to the boat’s bow. Adjust the
alignment as necessary
7. Check the display timing before using the system for navigation.
Checking for interference
Post installation check
If you have installed any system aboard a boat or made other
changes to the boat’s electronic systems (radar, VHF radio etc.),
you need to check before casting off, that all electrical systems
operate satisfactorily without any undue electrical interference,
in order to conform with Electro Magnetic Compatibility (EMC)
regulations. To do this:
1. Ensuring it is safe to do so, turn on all electronic systems aboard
the boat.
2. Check that the electronic systems all operate satisfactorily.
Installation 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine HD Digital Radome Antenna at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine HD Digital Radome Antenna in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info