470000

Raymarine HD Digital Radome Antenna Manual

20
Zoom out
Zoom in
Previous page
1/36
Next page
Run the digital cable from the HD Digital Radome Antenna to the
signal and power connection points:
• Run the signal connector to the appropriate MFD.
• Run the power cable to a suitable 12 V or 24 V connection point
on the boat’s power system. We recommend connection is made
at the boats power distribution panel, wherever possible.
Caution: Pulling cables
Do NOT use cords or ropes, attached to cable
connectors, to pull cables through restricted
apertures (e.g. as in bulkheads), as this could
cause damage to cables.
Routing cables
Cables must be routed correctly, to maximize performance and
prolong cable life.
•
Do NOT bend cables excessively. Wherever possible, ensure a
minimum bend radius of 100 mm.
Minimum bend of cable
100 mm (4 in) radius
Minimum bend
200 mm (8 in)
diameter
• Protect all cables from physical damage and exposure to heat.
Use trunking or conduit where possible. Do NOT run cables
through bilges or doorways, or close to moving or hot objects.
• Secure cables in place using tie-wraps or lacing twine. Coil any
extra cable and tie it out of the way.
• Where a cable passes through an exposed bulkhead or deckhead,
use a suitable watertight feed-through.
• Do NOT run cables near to engines or uorescent lights.
Always route data cables as far away as possible from:
• other equipment and cables,
• high current carrying ac and dc power lines,
• antennae.
Connecting antenna
Ensuring that the arrow on the digital cable connector is aligned
with the red triangular mark on the HD Digital Radome Antenna
connector, connect the digital cable to the connector on the HD
Digital Radome Antenna, and fully hand-tighten. Do NOT use a
wrench or any other tool.
Note: If the antenna connector is disconnected after initial
installation, we recommend that before reconnecting, you lightly
coat the connector thread with Renolit Aqua 2 Calcium grease.
Connecting signal
Referring to the connection information for the multi-function display
(MFD) to which you are connecting, and to the Typical systems
diagrams given here, connect the digital cable signal connector
to the appropriate MFD.
20
HD Digital Radome User’s Guide
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine HD Digital Radome Antenna at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine HD Digital Radome Antenna in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info