558424

Raymarine e Series Manual

452
Zoom out
Zoom in
Previous page
1/460
Next page
Switch panel conguration
The switch panel application must be congured.
A Conguration le can be obtained from the system
supplier.
Loading a conguration le
The switch panel application will only be available
when a valid conguration le has been loaded.
1. Obtain the conguration le from the system
supplier.
2. Save the conguration le to the root directory of
your memory card.
3. Insert the memory card into the card reader on
your multifunction display.
4. From the homescreen select Set-up.
5. Select System Settings.
6. Select External Devices.
7. Select Switch Panel Set-up.
8. Select Install Cong File.
9. If prompted select the memory card slot that
contains your conguration le.
The le browser is opened.
10.Select the conguration le.
11. Select OK.
You can now add the Switch panel application from
the Customize menu on the homescreen.
Note: If your multifunction display only has 1 card
slot then step 9 is skipped.
Switch panel overview
The switch panel application is used to monitor and
control compatible vessel control and monitoring
systems. The pages and page layouts and vessel
schematics are congured at installation and are
unique for each vessel. The images below are
examples.
Example 1 — Switch panel mode page
If congured a Mode page provides controls to
switch between pre-congured modes.
In the example above selecting a mode icon will
place the system into the selected mode.
You can cycle through available pages to monitor or
control switches and congured groups of switches.
Example 2 — Vessel controls page
1
3
5
2
4
6
D12739-1
1 Toggle switch.
2
Rotary (multi-state) switch.
3 Position control switch.
4 Momentary switch.
5
Data item (dial gauge).
6
Data item (tank level).
Using the switches on a Touchscreen
This only applies to HybridTouch displays.
From the switch panel application:
1. Toggle switch — Select the switch to switch on
or off.
2. Rotary control — Selecting the rotary control
will cycle through its available states.
3. Position Control — Select and hold on a
direction to move.
4. Momentary switch — Select the switch to
activate.
5. Dimmer switch — Select and then drag the
control to adjust the value.
Using the switches
From the switch panel application:
1. Use the Joystick to highlight the relevant switch.
2. Toggle switch — Press Ok to switch on or off.
3. Rotary control — Pressing Ok will cycle through
its available states.
4. Position Control — Press Ok and use the
Joystick to move direction.
5. Momentary switch — Press Ok to activate.
6. Dimmer switch — Press Ok on the switch and
use the Rotary Control to adjust the value, then
select back to exit adjust mode.
Resetting a tripped circuit
When a circuit is tripped a pop-up message will be
displayed on-screen providing details of the tripped
circuit and options, the circuit will also be identied
as tripped in the switch panel pages.
1. With a tripped circuit pop-up message displayed
select Reset. to reset the tripped circuit, or
2. Select the switch on a switch panel page to reset
the tripped switch.
Note: Performing multiple resets risks causing
damage to your system so if a trip persists check
the main circuits.
452 a Series / c Series / e Series
… 452 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Raymarine e Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Raymarine e Series in the language / languages: English as an attachment in your email.

The manual is 30,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Raymarine e Series

Raymarine e Series User Manual - German - 396 pages

Raymarine e Series User Manual - Dutch - 394 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info